| NVIDIA DOCA SDK | Data Center on a Chip Framework Documentation |

Go to the source code of this file.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ABSOLUTE_ERROR 320 |
This Information Element specifies the maximum possible measurement error of the reported value for a given Information Element. The absoluteError has the same unit as the Information Element with which it is associated. The real value of the metric can differ by absoluteError (positive or negative) from the measured value.
Definition at line 1778 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ABSOLUTE_ERROR_DEFAULT_LENGTH 8 |
Definition at line 1779 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_POOL_HIGH_THRESHOLD 476 |
This element represents the high threshold value of the number of public IP addresses in the address pool.
Definition at line 2829 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_POOL_HIGH_THRESHOLD_DEFAULT_LENGTH 4 |
Definition at line 2830 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_POOL_LOW_THRESHOLD 477 |
This element represents the low threshold value of the number of public IP addresses in the address pool.
Definition at line 2835 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_POOL_LOW_THRESHOLD_DEFAULT_LENGTH 4 |
Definition at line 2836 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_PORT_MAPPING_HIGH_THRESHOLD 478 |
This element represents the high threshold value of the number of address and port mappings.
Definition at line 2840 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_PORT_MAPPING_HIGH_THRESHOLD_DEFAULT_LENGTH 4 |
Definition at line 2841 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_PORT_MAPPING_LOW_THRESHOLD 479 |
This element represents the low threshold value of the number of address and port mappings.
Definition at line 2845 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_PORT_MAPPING_LOW_THRESHOLD_DEFAULT_LENGTH 4 |
Definition at line 2846 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_PORT_MAPPING_PER_USER_HIGH_THRESHOLD 480 |
This element represents the high threshold value of the number of address and port mappings that a single user is allowed to create on a NAT device.
Definition at line 2851 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ADDRESS_PORT_MAPPING_PER_USER_HIGH_THRESHOLD_DEFAULT_LENGTH 4 |
Definition at line 2852 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ANONYMIZATION_FLAGS 285 |
A flag word describing specialized modifications to the anonymization policy in effect for the anonymization technique applied to a referenced Information Element within a referenced Template. When flags are clear (0), the normal policy (as described by anonymizationTechnique) applies without modification.
Definition at line 1563 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ANONYMIZATION_FLAGS_DEFAULT_LENGTH 2 |
Definition at line 1564 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ANONYMIZATION_TECHNIQUE 286 |
A description of the anonymization technique applied to a referenced Information Element within a referenced Template. Each technique may be applicable only to certain Information Elements and recommended only for certain Information Elements. Values are listed in the anonymizationTechnique registry. See [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-anonymization-technique].
Definition at line 1572 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ANONYMIZATION_TECHNIQUE_DEFAULT_LENGTH 2 |
Definition at line 1573 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_CATEGORY_NAME 372 |
An attribute that provides a first level categorization for each Application ID.
Definition at line 2110 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_CATEGORY_NAME_DEFAULT_LENGTH 64 |
Definition at line 2111 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_DESCRIPTION 94 |
Application description.
Definition at line 465 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_DESCRIPTION_DEFAULT_LENGTH 64 |
Definition at line 466 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_GROUP_NAME 374 |
An attribute that groups multiple Application IDs that belong to the same networking application.
Definition at line 2120 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_GROUP_NAME_DEFAULT_LENGTH 64 |
Definition at line 2121 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_NAME 96 |
Name associated with a classification.
Definition at line 475 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_NAME_DEFAULT_LENGTH 64 |
Definition at line 476 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_SUB_CATEGORY_NAME 373 |
An attribute that provides a second level categorization for each Application ID.
Definition at line 2115 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_SUB_CATEGORY_NAME_DEFAULT_LENGTH 64 |
Definition at line 2116 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_TAG 95 |
8 bits of engine ID, followed by n bits of classification.
Definition at line 470 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_APPLICATION_TAG_DEFAULT_LENGTH 3 |
Definition at line 471 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BASIC_LIST 291 |
Specifies a generic Information Element with a basicList abstract data type. For example, a list of port numbers, a list of interface indexes, etc.
Definition at line 1600 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BASIC_LIST_DEFAULT_LENGTH 64 |
Definition at line 1601 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_COMMUNITY 483 |
BGP community as defined in [RFC1997]
Definition at line 2867 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_COMMUNITY_DEFAULT_LENGTH 4 |
Definition at line 2868 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_DESTINATION_COMMUNITY_LIST 485 |
basicList of zero or more bgpCommunity IEs, containing the BGP communities corresponding with destination IP address of a specific flow
Definition at line 2879 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_DESTINATION_COMMUNITY_LIST_DEFAULT_LENGTH 64 |
Definition at line 2880 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_DESTINATION_EXTENDED_COMMUNITY_LIST 488 |
basicList of zero or more bgpExtendedCommunity IEs, containing the BGP Extended Communities corresponding with destination IP address of a specific flow
Definition at line 2896 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_DESTINATION_EXTENDED_COMMUNITY_LIST_DEFAULT_LENGTH 64 |
Definition at line 2897 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_EXTENDED_COMMUNITY 486 |
BGP Extended Community as defined in [RFC4360]; the size of this IE MUST be 8 octets
Definition at line 2884 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_EXTENDED_COMMUNITY_DEFAULT_LENGTH 3 |
Definition at line 2885 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_IPV4_NEXT_HOP 18 |
Next-hop router's IP in the BGP domain
Definition at line 107 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_IPV4_NEXT_HOP_DEFAULT_LENGTH 4 |
Definition at line 108 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_LARGE_COMMUNITY 489 |
BGP Large Community as defined in [RFC8092]; the size of this IE MUST be 12 octets.
Definition at line 2901 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_LARGE_COMMUNITY_DEFAULT_LENGTH 3 |
Definition at line 2902 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_NEXT_ADJACENT_AS_NUMBER 128 |
The autonomous system (AS) number of the first AS in the AS path to the destination IP address. The path is deduced by looking up the destination IP address of the Flow in the BGP routing information base. If AS path information for this Flow is only available as an unordered AS set (and not as an ordered AS sequence), then the value of this Information Element is 0.
Definition at line 509 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_NEXT_ADJACENT_AS_NUMBER_DEFAULT_LENGTH 4 |
Definition at line 510 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_PREV_ADJACENT_AS_NUMBER 129 |
The autonomous system (AS) number of the last AS in the AS path from the source IP address. The path is deduced by looking up the source IP address of the Flow in the BGP routing information base. If AS path information for this Flow is only available as an unordered AS set (and not as an ordered AS sequence), then the value of this Information Element is 0. In case of BGP asymmetry, the bgpPrevAdjacentAsNumber might not be able to report the correct value.
Definition at line 518 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_PREV_ADJACENT_AS_NUMBER_DEFAULT_LENGTH 4 |
Definition at line 519 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_SOURCE_COMMUNITY_LIST 484 |
basicList of zero or more bgpCommunity IEs, containing the BGP communities corresponding with source IP address of a specific flow
Definition at line 2873 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_SOURCE_COMMUNITY_LIST_DEFAULT_LENGTH 64 |
Definition at line 2874 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_SOURCE_EXTENDED_COMMUNITY_LIST 487 |
basicList of zero or more bgpExtendedCommunity IEs, containing the BGP Extended Communities corresponding with source IP address of a specific flow
Definition at line 2890 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_SOURCE_EXTENDED_COMMUNITY_LIST_DEFAULT_LENGTH 64 |
Definition at line 2891 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_VALIDITY_STATE 294 |
This element describes the "validity state" of the BGP route correspondent source or destination IP address. If the "validity state" for this Flow is only available, then the value of this Information Element is 255.
Definition at line 1617 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BGP_VALIDITY_STATE_DEFAULT_LENGTH 1 |
Definition at line 1618 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BIFLOW_DIRECTION 239 |
A description of the direction assignment method used to assign the Biflow Source and Destination. This Information Element MAY be present in a Flow Data Record, or applied to all flows exported from an Exporting Process or Observation Domain using IPFIX Options. If this Information Element is not present in a Flow Record or associated with a Biflow via scope, it is assumed that the configuration of the direction assignment method is done out-of-band. Note that when using IPFIX Options to apply this Information Element to all flows within an Observation Domain or from an Exporting Process, the Option SHOULD be sent reliably. If reliable transport is not available (i.e., when using UDP), this Information Element SHOULD appear in each Flow Record. Values are listed in the biflowDirection registry. See [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-biflow-direction].
Definition at line 1205 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BIFLOW_DIRECTION_DEFAULT_LENGTH 1 |
Definition at line 1206 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BPG_IPV6_NEXT_HOP 63 |
Next-hop router in the BGP domain
Definition at line 329 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_BPG_IPV6_NEXT_HOP_DEFAULT_LENGTH 16 |
Definition at line 330 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTION_TIME_MILLISECONDS 258 |
The absolute timestamp at which the data within the scope containing this Information Element was received by a Collecting Process. This Information Element SHOULD be bound to its containing IPFIX Message via IPFIX Options and the messageScope Information Element, as defined below.
Definition at line 1333 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTION_TIME_MILLISECONDS_DEFAULT_LENGTH 8 |
Definition at line 1334 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTOR_CERTIFICATE 274 |
The full X.509 certificate, encoded in ASN.1 DER format, used by the Collector when IPFIX Messages were transmitted using TLS or DTLS. This Information Element SHOULD be bound to its containing IPFIX Transport Session via an options record and the sessionScope Information Element, or to its containing IPFIX Message via an options record and the messageScope Information Element.
Definition at line 1480 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTOR_CERTIFICATE_DEFAULT_LENGTH 3 |
Definition at line 1481 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTOR_IPV4_ADDRESS 211 |
An IPv4 address to which the Exporting Process sends Flow information.
Definition at line 1018 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTOR_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 1019 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTOR_IPV6_ADDRESS 212 |
An IPv6 address to which the Exporting Process sends Flow information.
Definition at line 1023 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTOR_IPV6_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 1024 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTOR_TRANSPORT_PORT 216 |
The destination port identifier to which the Exporting Process sends Flow information. For the transport protocols UDP, TCP, and SCTP, this is the destination port number. This field MAY also be used for future transport protocols that have 16-bit source port identifiers.
Definition at line 1052 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COLLECTOR_TRANSPORT_PORT_DEFAULT_LENGTH 2 |
Definition at line 1053 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COMMON_PROPERTIES_ID 137 |
An identifier of a set of common properties that is unique per Observation Domain and Transport Session. Typically, this Information Element is used to link to information reported in separate Data Records.
Definition at line 570 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_COMMON_PROPERTIES_ID_DEFAULT_LENGTH 8 |
Definition at line 571 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_CONFIDENCE_LEVEL 338 |
This Information Element specifies the confidence level. It is used to provide an accuracy statement for estimated values. The confidence level provides the probability p with which the real value lies within a given range. A confidence level always needs to be associated with confidence limits that define the range in which the real value is assumed to be.
Definition at line 1887 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_CONFIDENCE_LEVEL_DEFAULT_LENGTH 8 |
Definition at line 1888 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_CONNECTION_SUM_DURATION_SECONDS 279 |
This information element aggregates the total time in seconds for all of the TCP or UDP connections which were in use during the observation period. For example if there are 5 concurrent connections each for 10 seconds, the value would be 50 s.
Definition at line 1518 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_CONNECTION_SUM_DURATION_SECONDS_DEFAULT_LENGTH 8 |
Definition at line 1519 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_CONNECTION_TRANSACTION_ID 280 |
This information element identifies a transaction within a connection. A transaction is a meaningful exchange of application data between two network devices or a client and server. A transactionId is assigned the first time a flow is reported, so that later reports for the same flow will have the same transactionId. A different transactionId is used for each transaction within a TCP or UDP connection. The identifiers need not be sequential.
Definition at line 1527 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_CONNECTION_TRANSACTION_ID_DEFAULT_LENGTH 8 |
Definition at line 1528 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DATA_LINK_FRAME_SECTION 315 |
This Information Element carries n octets from the data link frame of a selected frame, starting sectionOffset octets into the frame.
Definition at line 1745 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DATA_LINK_FRAME_SECTION_DEFAULT_LENGTH 3 |
Definition at line 1746 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DATA_LINK_FRAME_SIZE 312 |
This Information Element specifies the length of the selected data link frame.
Definition at line 1727 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DATA_LINK_FRAME_SIZE_DEFAULT_LENGTH 2 |
Definition at line 1728 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DATA_LINK_FRAME_TYPE 408 |
This Information Element specifies the type of the selected data link frame.
Definition at line 2361 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DATA_LINK_FRAME_TYPE_DEFAULT_LENGTH 2 |
Definition at line 2362 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DATA_RECORDS_RELIABILITY 276 |
The export reliability of Data Records, within this SCTP stream, for the element(s) in the Options Template scope. A typical example of an element for which the export reliability will be reported is the templateID, as specified in the Data Records Reliability Options Template. A value of 'True' means that the Exporting Process MUST send any Data Records associated with the element(s) reliably within this SCTP stream. A value of 'False' means that the Exporting Process MAY send any Data Records associated with the element(s) unreliably within this SCTP stream.
Definition at line 1499 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DATA_RECORDS_RELIABILITY_DEFAULT_LENGTH 1 |
Definition at line 1500 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DESTINATION_IPV6_PREFIX 169 |
IPv6 destination address prefix.
Definition at line 766 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DESTINATION_IPV6_PREFIX_DEFAULT_LENGTH 8 |
Definition at line 767 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DIGEST_HASH_VALUE 326 |
This Information Element specifies the value from the digest hash function. See also Sections 6.2, 3.8 and 7.1 of [RFC5475].
Definition at line 1812 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DIGEST_HASH_VALUE_DEFAULT_LENGTH 8 |
Definition at line 1813 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DIRECTION 61 |
Flow direction: 0 - ingress flow, 1 - egress flow
Definition at line 319 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DIRECTION_DEFAULT_LENGTH 1 |
Definition at line 320 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_DESTINATION_IP_ADDRESS 379 |
The count of distinct destination IP address values for Original Flows contributing to this Aggregated Flow, without regard to IP version. This Information Element is preferred to the version-specific counters below, unless it is important to separate the counts by version.
Definition at line 2152 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_DESTINATION_IP_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 2153 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_DESTINATION_IPV4_ADDRESS 381 |
The count of distinct destination IPv4 address values for Original Flows contributing to this Aggregated Flow.
Definition at line 2164 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_DESTINATION_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 2165 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_DESTINATION_IPV6_ADDRESS 383 |
The count of distinct destination IPv6 address values for Original Flows contributing to this Aggregated Flow.
Definition at line 2176 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_DESTINATION_IPV6_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 2177 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_SOURCE_IP_ADDRESS 378 |
The count of distinct source IP address values for Original Flows contributing to this Aggregated Flow, without regard to IP version. This Information Element is preferred to the IP-version-specific counters, unless it is important to separate the counts by version.
Definition at line 2145 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_SOURCE_IP_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 2146 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_SOURCE_IPV4_ADDRESS 380 |
The count of distinct source IPv4 address values for Original Flows contributing to this Aggregated Flow.
Definition at line 2158 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_SOURCE_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 2159 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_SOURCE_IPV6_ADDRESS 382 |
The count of distinct source IPv6 address values for Original Flows contributing to this Aggregated Flow.
Definition at line 2170 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DISTINCT_COUNT_OF_SOURCE_IPV6_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 2171 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_DEI 389 |
In case of a QinQ frame, it represents the inner tag's Drop Eligible Indicator (DEI) field and in case of an IEEE 802.1ad frame it represents the DEI field of the C-TAG.
Definition at line 2218 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_DEI_DEFAULT_LENGTH 1 |
Definition at line 2219 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_DESTINATION_MAC_ADDRESS 415 |
The value of the Encapsulated Customer Destination Address (C-DA) portion of the Backbone Service Instance Tag (I-TAG) Tag Control Information (TCI) field of an Ethernet frame as described in [IEEE802.1Q].
Definition at line 2415 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_DESTINATION_MAC_ADDRESS_DEFAULT_LENGTH 6 |
Definition at line 2416 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_PRIORITY 246 |
The value represents the 3-bit Priority Code Point (PCP) portion of the Customer VLAN Tag (C-TAG) Tag Control Information (TCI) field as described in [IEEE802.1Q].
Definition at line 1258 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_PRIORITY_DEFAULT_LENGTH 1 |
Definition at line 1259 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_SOURCE_MAC_ADDRESS 414 |
The value of the Encapsulated Customer Source Address (C-SA) portion of the Backbone Service Instance Tag (I-TAG) Tag Control Information (TCI) field of an Ethernet frame as described in [IEEE802.1Q].
Definition at line 2408 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_SOURCE_MAC_ADDRESS_DEFAULT_LENGTH 6 |
Definition at line 2409 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_VLAN_ID 245 |
The value represents the Customer VLAN identifier in the Customer VLAN Tag (C-TAG) Tag Control Information (TCI) field as described in [IEEE802.1Q].
Definition at line 1252 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_CUSTOMER_VLAN_ID_DEFAULT_LENGTH 2 |
Definition at line 1253 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_DEI 388 |
The value of the 1-bit Drop Eligible Indicator (DEI) field of the VLAN tag as described in 802.1Q-2011 subclause 9.6. In case of a QinQ frame, it represents the outer tag's DEI field and in case of an IEEE 802.1ad frame it represents the DEI field of the S-TAG. Note: in earlier versions of 802.1Q the same bit field in the incoming packet is occupied by the Canonical Format Indicator (CFI) field, except for S-TAGs.
Definition at line 2212 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_DEI_DEFAULT_LENGTH 1 |
Definition at line 2213 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_PRIORITY 244 |
The value of the 3-bit User Priority portion of the Tag Control Information field of an Ethernet frame. The structure and semantics within the Tag Control Information field are defined in [IEEE802.1Q]. In the case of multi-tagged frame, it represents the 3-bit Priority Code Point (PCP) portion of the outer tag's Tag Control Information (TCI) field as described in [IEEE802.1Q], except for I-TAG.
Definition at line 1246 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_PRIORITY_DEFAULT_LENGTH 1 |
Definition at line 1247 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_SERVICE_INSTANCE_ID 412 |
The value of the 24-bit Backbone Service Instance Identifier (I-SID) portion of the Backbone Service Instance Tag (I-TAG) Tag Control Information (TCI) field of an Ethernet frame as described in [IEEE802.1Q].
Definition at line 2394 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_SERVICE_INSTANCE_ID_DEFAULT_LENGTH 4 |
Definition at line 2395 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_SERVICE_INSTANCE_PRIORITY 413 |
The value of the 3-bit Backbone Service Instance Priority Code Point (I-PCP) portion of the Backbone Service Instance Tag (I-TAG) Tag Control Information (TCI) field of an Ethernet frame as described in [IEEE802.1Q].
Definition at line 2401 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_SERVICE_INSTANCE_PRIORITY_DEFAULT_LENGTH 1 |
Definition at line 2402 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_SERVICE_INSTANCE_TAG 411 |
This Information Element, which is 16 octets long, represents the Backbone Service Instance Tag (I-TAG) Tag Control Information (TCI) field of an Ethernet frame as described in [IEEE802.1Q]. It encodes the Backbone Service Instance Priority Code Point (I-PCP), Backbone Service Instance Drop Eligible Indicator (I-DEI), Use Customer Addresses (UCAs), Backbone Service Instance Identifier (I-SID), Encapsulated Customer Destination Address (C-DA), Encapsulated Customer Source Address (C-SA), and reserved fields. The structure and semantics within the Tag Control Information field are defined in [IEEE802.1Q].
Definition at line 2387 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_SERVICE_INSTANCE_TAG_DEFAULT_LENGTH 3 |
Definition at line 2388 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_VLAN_ID 243 |
The value of the 12-bit VLAN Identifier portion of the Tag Control Information field of an Ethernet frame. The structure and semantics within the Tag Control Information field are defined in [IEEE802.1Q]. In Provider Bridged Networks, it represents the Service VLAN identifier in the Service VLAN Tag (S-TAG) Tag Control Information (TCI) field or the Customer VLAN identifier in the Customer VLAN Tag (C-TAG) Tag Control Information (TCI) field as described in [IEEE802.1Q]. In Provider Backbone Bridged Networks, it represents the Backbone VLAN identifier in the Backbone VLAN Tag (B-TAG) Tag Control Information (TCI) field as described in [IEEE802.1Q]. In a virtual link between a host system and EVB bridge, it represents the Service VLAN identifier indicating S-channel as described in [IEEE802.1Qbg].
Definition at line 1237 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DOT1Q_VLAN_ID_DEFAULT_LENGTH 2 |
Definition at line 1238 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_LAYER2_OCTET_DELTA_COUNT 424 |
The number of layer 2 octets since the previous report (if any) in packets of this Flow dropped by packet treatment. The number of octets includes layer 2 header(s) and layer 2 payload.
Definition at line 2463 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_LAYER2_OCTET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2464 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_LAYER2_OCTET_TOTAL_COUNT 425 |
The total number of octets in observed layer 2 packets (including the layer 2 header) that were dropped by packet treatment since the (re-)initialization of the Metering Process.
Definition at line 2469 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_LAYER2_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2470 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_OCTET_DELTA_COUNT 132 |
The number of octets since the previous report (if any) in packets of this Flow dropped by packet treatment. The number of octets includes IP header(s) and IP payload.
Definition at line 538 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_OCTET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 539 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_OCTET_TOTAL_COUNT 134 |
The total number of octets in packets of this Flow dropped by packet treatment since the Metering Process (re-)initialization for this Observation Point. The number of octets includes IP header(s) and IP payload.
Definition at line 551 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 552 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_PACKET_DELTA_COUNT 133 |
The number of packets since the previous report (if any) of this Flow dropped by packet treatment.
Definition at line 544 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_PACKET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 545 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_PACKET_TOTAL_COUNT 135 |
The number of packets of this Flow dropped by packet treatment since the Metering Process (re-)initialization for this Observation Point.
Definition at line 557 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DROPPED_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 558 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_AS 17 |
Destination BGP autonomous system number where N could be 2 or 4
Definition at line 102 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_AS_DEFAULT_LENGTH 2 |
Definition at line 103 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_MASK 13 |
The number of contiguous bits in the destination address subnet mask i.e.: the submask in slash notation
Definition at line 82 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_MASK_DEFAULT_LENGTH 1 |
Definition at line 83 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_TOS 55 |
Type of Service byte setting when exiting outgoing interface
Definition at line 288 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_TOS_DEFAULT_LENGTH 1 |
Definition at line 289 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_TRAFFIC_INDEX 93 |
BGP Policy Accounting Destination Traffic Index
Definition at line 460 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_TRAFFIC_INDEX_DEFAULT_LENGTH 4 |
Definition at line 461 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_VLAN 59 |
Virtual LAN identifier associated with egress interface
Definition at line 308 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_DST_VLAN_DEFAULT_LENGTH 2 |
Definition at line 309 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_BROADCAST_PACKET_TOTAL_COUNT 358 |
The total number of incoming broadcast packets metered at the Observation Point since the Metering Process (re-)initialization for this Observation Point.
Definition at line 2031 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_BROADCAST_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2032 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_INTERFACE_TYPE 369 |
The type of interface where packets of this Flow are being sent. The value matches the value of managed object 'ifType' as defined in [https://www.iana.org/assignments/ianaiftype-mib].
Definition at line 2095 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_INTERFACE_TYPE_DEFAULT_LENGTH 4 |
Definition at line 2096 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_PHYSICAL_INTERFACE 253 |
The index of a networking device's physical interface (example, a switch port) where packets of this flow are being sent.
Definition at line 1299 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_PHYSICAL_INTERFACE_DEFAULT_LENGTH 4 |
Definition at line 1300 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_UNICAST_PACKET_TOTAL_COUNT 357 |
The total number of incoming unicast packets metered at the Observation Point since the Metering Process (re-)initialization for this Observation Point.
Definition at line 2025 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_UNICAST_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2026 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_VRFID 235 |
An unique identifier of the VRFname where the packets of this flow are being sent. This identifier is unique per Metering Process
Definition at line 1174 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EGRESS_VRFID_DEFAULT_LENGTH 4 |
Definition at line 1175 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ENCRYPTED_TECHNOLOGY 290 |
Specifies if the Application ID is an encrypted networking protocol.
Definition at line 1594 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ENCRYPTED_TECHNOLOGY_DEFAULT_LENGTH 64 |
Definition at line 1595 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ENGINE_ID 39 |
ID number of the flow switching engine
Definition at line 214 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ENGINE_ID_DEFAULT_LENGTH 1 |
Definition at line 215 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ENGINE_TYPE 38 |
Type of flow switching engine: RP = 0, VIP/Linecard = 1
Definition at line 209 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ENGINE_TYPE_DEFAULT_LENGTH 1 |
Definition at line 210 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ETHERNET_HEADER_LENGTH 240 |
The difference between the length of an Ethernet frame (minus the FCS) and the length of its MAC Client Data section (including any padding) as defined in section 3.1 of [IEEE.802-3.2005]. It does not include the Preamble, SFD and Extension field lengths.
Definition at line 1212 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ETHERNET_HEADER_LENGTH_DEFAULT_LENGTH 1 |
Definition at line 1213 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ETHERNET_PAYLOAD_LENGTH 241 |
The length of the MAC Client Data section (including any padding) of a frame as defined in section 3.1 of [IEEE.802-3.2005].
Definition at line 1218 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ETHERNET_PAYLOAD_LENGTH_DEFAULT_LENGTH 2 |
Definition at line 1219 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ETHERNET_TOTAL_LENGTH 242 |
The total length of the Ethernet frame (excluding the Preamble, SFD, Extension and FCS fields) as described in section 3.1 of [IEEE.802-3.2005].
Definition at line 1224 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ETHERNET_TOTAL_LENGTH_DEFAULT_LENGTH 2 |
Definition at line 1225 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ETHERNET_TYPE 256 |
The Ethernet type field of an Ethernet frame that identifies the MAC client protocol carried in the payload as defined in paragraph 1.4.349 of [IEEE.802-3.2005].
Definition at line 1319 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ETHERNET_TYPE_DEFAULT_LENGTH 2 |
Definition at line 1320 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORT_INTERFACE 213 |
The index of the interface from which IPFIX Messages sent by the Exporting Process to a Collector leave the IPFIX Device. The value matches the value of managed object 'ifIndex' as defined in [RFC2863]. Note that ifIndex values are not assigned statically to an interface and that the interfaces may be renumbered every time the device's management system is re-initialized, as specified in [RFC2863].
Definition at line 1032 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORT_INTERFACE_DEFAULT_LENGTH 4 |
Definition at line 1033 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORT_PROTOCOL_VERSION 214 |
The protocol version used by the Exporting Process for sending Flow information. The protocol version is given by the value of the Version Number field in the Message Header.
Definition at line 1038 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORT_PROTOCOL_VERSION_DEFAULT_LENGTH 1 |
Definition at line 1039 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORT_SCTP_STREAM_ID 259 |
The value of the SCTP Stream Identifier used by the Exporting Process for exporting IPFIX Message data. This is carried in the Stream Identifier field of the header of the SCTP DATA chunk containing the IPFIX Message(s).
Definition at line 1340 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORT_SCTP_STREAM_ID_DEFAULT_LENGTH 2 |
Definition at line 1341 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORT_TRANSPORT_PROTOCOL 215 |
The value of the protocol number used by the Exporting Process for sending Flow information. The protocol number identifies the IP packet payload type. Protocol numbers are defined in the IANA Protocol Numbers registry.
Definition at line 1045 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORT_TRANSPORT_PROTOCOL_DEFAULT_LENGTH 1 |
Definition at line 1046 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTER_CERTIFICATE 275 |
The full X.509 certificate, encoded in ASN.1 DER format, used by the Collector when IPFIX Messages were transmitted using TLS or DTLS. This Information Element SHOULD be bound to its containing IPFIX Transport Session via an options record and the sessionScope Information Element, or to its containing IPFIX Message via an options record and the messageScope Information Element.
Definition at line 1489 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTER_CERTIFICATE_DEFAULT_LENGTH 3 |
Definition at line 1490 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTER_IPV4_ADDRESS 130 |
The IPv4 address used by the Exporting Process. This is used by the Collector to identify the Exporter in cases where the identity of the Exporter may have been obscured by the use of a proxy.
Definition at line 525 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTER_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 526 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTER_IPV6_ADDRESS 131 |
The IPv6 address used by the Exporting Process. This is used by the Collector to identify the Exporter in cases where the identity of the Exporter may have been obscured by the use of a proxy.
Definition at line 532 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTER_IPV6_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 533 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTER_TRANSPORT_PORT 217 |
The source port identifier from which the Exporting Process sends Flow information. For the transport protocols UDP, TCP, and SCTP, this is the source port number. This field MAY also be used for future transport protocols that have 16-bit source port identifiers. This field may be useful for distinguishing multiple Exporting Processes that use the same IP address.
Definition at line 1060 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTER_TRANSPORT_PORT_DEFAULT_LENGTH 2 |
Definition at line 1061 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTING_PROCESS_ID 144 |
An identifier of an Exporting Process that is unique per IPFIX Device. Typically, this Information Element is used for limiting the scope of other Information Elements. Note that process identifiers are typically assigned dynamically. The Exporting Process may be re-started with a different ID.
Definition at line 616 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXPORTING_PROCESS_ID_DEFAULT_LENGTH 4 |
Definition at line 617 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXTERNAL_ADDRESS_REALM 465 |
This Information Element represents the external address realm where the packet is originated from or destined to. The detailed definition is in the internal address realm as specified above.
Definition at line 2767 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_EXTERNAL_ADDRESS_REALM_DEFAULT_LENGTH 3 |
Definition at line 2768 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FIREWALL_EVENT 233 |
Indicates a firewall event. Allowed values are listed in the firewallEvent registry. See [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-firewall-event].
Definition at line 1162 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FIREWALL_EVENT_DEFAULT_LENGTH 1 |
Definition at line 1163 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FIRST_SWITCHED 22 |
System uptime at which the first packet of this flow was switched
Definition at line 128 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FIRST_SWITCHED_DEFAULT_LENGTH 4 |
Definition at line 129 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_ACTIVE_TIMEOUT 36 |
Timeout value (in seconds) for active flow entries in the NetFlow cache
Definition at line 199 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_ACTIVE_TIMEOUT_DEFAULT_LENGTH 2 |
Definition at line 200 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_DURATION_MICROSECONDS 162 |
The difference in time between the first observed packet of this Flow and the last observed packet of this Flow.
Definition at line 719 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_DURATION_MICROSECONDS_DEFAULT_LENGTH 4 |
Definition at line 720 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_DURATION_MILLISECONDS 161 |
The difference in time between the first observed packet of this Flow and the last observed packet of this Flow.
Definition at line 713 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_DURATION_MILLISECONDS_DEFAULT_LENGTH 4 |
Definition at line 714 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_DELTA_MICROSECONDS 159 |
This is a relative timestamp only valid within the scope of a single IPFIX Message. It contains the negative time offset of the last observed packet of this Flow relative to the export time specified in the IPFIX Message Header.
Definition at line 702 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_DELTA_MICROSECONDS_DEFAULT_LENGTH 4 |
Definition at line 703 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_MICROSECONDS 155 |
The absolute timestamp of the last packet of this Flow.
Definition at line 678 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_MICROSECONDS_DEFAULT_LENGTH 8 |
Definition at line 679 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_MILLISECONDS 153 |
The absolute timestamp of the last packet of this Flow.
Definition at line 668 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_MILLISECONDS_DEFAULT_LENGTH 8 |
Definition at line 669 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_NANOSECONDS 157 |
The absolute timestamp of the last packet of this Flow.
Definition at line 688 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_NANOSECONDS_DEFAULT_LENGTH 8 |
Definition at line 689 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_REASON 136 |
The reason for Flow termination. Values are listed in the flowEndReason registry. See [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-flow-end-reason].
Definition at line 563 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_REASON_DEFAULT_LENGTH 1 |
Definition at line 564 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_SECONDS 151 |
The absolute timestamp of the last packet of this Flow.
Definition at line 658 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_END_SECONDS_DEFAULT_LENGTH 4 |
Definition at line 659 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_ID 148 |
An identifier of a Flow that is unique within an Observation Domain. This Information Element can be used to distinguish between different Flows if Flow Keys such as IP addresses and port numbers are not reported or are reported in separate records.
Definition at line 640 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_ID_DEFAULT_LENGTH 8 |
Definition at line 641 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_INACTIVE_TIMEOUT 37 |
Timeout value (in seconds) for inactive flow entries in the NetFlow cache
Definition at line 204 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_INACTIVE_TIMEOUT_DEFAULT_LENGTH 2 |
Definition at line 205 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_KEY_INDICATOR 173 |
This set of bit fields is used for marking the Information Elements of a Data Record that serve as Flow Key. Each bit represents an Information Element in the Data Record, with the n-th least significant bit representing the n-th Information Element. A bit set to value 1 indicates that the corresponding Information Element is a Flow Key of the reported Flow. A bit set to value 0 indicates that this is not the case.
Definition at line 794 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_KEY_INDICATOR_DEFAULT_LENGTH 8 |
Definition at line 795 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLER_ID 48 |
Identifier shown in "show flow-sampler"
Definition at line 257 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLER_ID_DEFAULT_LENGTH 1 |
Definition at line 258 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLER_MODE 49 |
The type of algorithm used for sampling data: 0x02 random sampling. Use in connection with FLOW_SAMPLER_MODE
Definition at line 263 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLER_MODE_DEFAULT_LENGTH 1 |
Definition at line 264 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLER_RANDOM_INTERVAL 50 |
Packet interval at which to sample. Use in connection with FLOW_SAMPLER_MODE
Definition at line 268 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLER_RANDOM_INTERVAL_DEFAULT_LENGTH 4 |
Definition at line 269 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLING_TIME_INTERVAL 398 |
This Information Element specifies the time interval in microseconds during which all arriving Flows are sampled. For example, this Information Element may be used to describe the configuration of a systematic time-based Sampling Selector.
Definition at line 2288 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLING_TIME_INTERVAL_DEFAULT_LENGTH 8 |
Definition at line 2289 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLING_TIME_SPACING 399 |
This Information Element specifies the time interval in microseconds between two "flowSamplingTimeInterval"s. A value of 100 means that the next interval starts 100 microseconds (during which no Flows are sampled) after the current "flowsamplingTimeInterval" is over. For example, this Information Element may used to describe the configuration of a systematic time-based Sampling Selector.
Definition at line 2297 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SAMPLING_TIME_SPACING_DEFAULT_LENGTH 8 |
Definition at line 2298 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SELECTED_FLOW_DELTA_COUNT 393 |
This Information Element specifies the number of Flows that were selected in the Intermediate Flow Selection Process since the last report.
Definition at line 2250 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SELECTED_FLOW_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2251 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SELECTED_OCTET_DELTA_COUNT 391 |
This Information Element specifies the volume in octets of all Flows that are selected in the Intermediate Flow Selection Process since the previous report.
Definition at line 2238 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SELECTED_OCTET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2239 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SELECTED_PACKET_DELTA_COUNT 392 |
This Information Element specifies the volume in packets of all Flows that were selected in the Intermediate Flow Selection Process since the previous report.
Definition at line 2244 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SELECTED_PACKET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2245 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SELECTOR_ALGORITHM 390 |
This Information Element identifies the Intermediate Flow Selection Process technique (e.g., Filtering, Sampling) that is applied by the Intermediate Flow Selection Process. Most of these techniques have parameters. Its configuration parameter(s) MUST be clearly specified. Further Information Elements are needed to fully specify packet selection with these methods and all their parameters. Further method identifiers may be added to the flowSelectorAlgorithm registry. It might be necessary to define new Information Elements to specify their parameters. Please note that the purpose of the flow selection techniques described in this document is the improvement of measurement functions as defined in the Scope (Section 1). The Intermediate Flow Selection Process Techniques identifiers are defined at [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-flowselectoralgorithm].
Definition at line 2232 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_SELECTOR_ALGORITHM_DEFAULT_LENGTH 2 |
Definition at line 2233 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_DELTA_MICROSECONDS 158 |
This is a relative timestamp only valid within the scope of a single IPFIX Message. It contains the negative time offset of the first observed packet of this Flow relative to the export time specified in the IPFIX Message Header.
Definition at line 695 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_DELTA_MICROSECONDS_DEFAULT_LENGTH 4 |
Definition at line 696 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_MICROSECONDS 154 |
The absolute timestamp of the first packet of this Flow.
Definition at line 673 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_MICROSECONDS_DEFAULT_LENGTH 8 |
Definition at line 674 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_MILLISECONDS 152 |
The absolute timestamp of the first packet of this Flow.
Definition at line 663 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_MILLISECONDS_DEFAULT_LENGTH 8 |
Definition at line 664 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_NANOSECONDS 156 |
The absolute timestamp of the first packet of this Flow.
Definition at line 683 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_NANOSECONDS_DEFAULT_LENGTH 8 |
Definition at line 684 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_SECONDS 150 |
The absolute timestamp of the first packet of this Flow.
Definition at line 653 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOW_START_SECONDS_DEFAULT_LENGTH 4 |
Definition at line 654 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOWS 3 |
Number of flows that were aggregated; default for N is 4
Definition at line 30 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FLOWS_DEFAULT_LENGTH 4 |
Definition at line 31 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FORWARDING_STATUS 89 |
Forwarding status is encoded on 1 byte with the 2 left bits giving the status and the 6 remaining bits giving the reason code.
Definition at line 440 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FORWARDING_STATUS_DEFAULT_LENGTH 1 |
Definition at line 441 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FRAGMENT_FLAGS 197 |
Fragmentation properties indicated by flags in the IPv4 packet header or the IPv6 Fragment header, respectively.
Definition at line 935 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FRAGMENT_FLAGS_DEFAULT_LENGTH 1 |
Definition at line 936 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FRAGMENT_OFFSET 88 |
The fragment-offset value from fragmented IP packets
Definition at line 434 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_FRAGMENT_OFFSET_DEFAULT_LENGTH 2 |
Definition at line 435 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_GLOBAL_ADDRESS_MAPPING_HIGH_THRESHOLD 481 |
This element represents the high threshold value of the number of address and port mappings that a single user is allowed to create on a NAT device in a paired address pooling behavior.
Definition at line 2857 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_GLOBAL_ADDRESS_MAPPING_HIGH_THRESHOLD_DEFAULT_LENGTH 4 |
Definition at line 2858 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_GRE_KEY 296 |
GRE key, which is used for identifying an individual traffic flow within a tunnel.
Definition at line 1627 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_GRE_KEY_DEFAULT_LENGTH 4 |
Definition at line 1628 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_DIGEST_OUTPUT 333 |
This Information Element contains a boolean value that is TRUE if the output from this hash Selector has been configured to be included in the packet report as a packet digest, else FALSE.
Definition at line 1853 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_DIGEST_OUTPUT_DEFAULT_LENGTH 1 |
Definition at line 1854 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_FLOW_DOMAIN 400 |
This Information Element specifies the Information Elements that are used by the Hash-based Flow Selector as the Hash Domain.
Definition at line 2303 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_FLOW_DOMAIN_DEFAULT_LENGTH 2 |
Definition at line 2304 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_INITIALIZER_VALUE 334 |
This Information Element specifies the initializer value to the hash function.
Definition at line 1858 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_INITIALIZER_VALUE_DEFAULT_LENGTH 8 |
Definition at line 1859 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_IPPAYLOAD_OFFSET 327 |
This Information Element specifies the IP payload offset used by a Hash-based Selection Selector. See also Sections 6.2, 3.8 and 7.1 of [RFC5475].
Definition at line 1818 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_IPPAYLOAD_OFFSET_DEFAULT_LENGTH 8 |
Definition at line 1819 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_IPPAYLOAD_SIZE 328 |
This Information Element specifies the IP payload size used by a Hash-based Selection Selector. See also Sections 6.2, 3.8 and 7.1 of [RFC5475].
Definition at line 1824 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_IPPAYLOAD_SIZE_DEFAULT_LENGTH 8 |
Definition at line 1825 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_OUTPUT_RANGE_MAX 330 |
This Information Element specifies the value for the end of a hash function's potential output range.
Definition at line 1836 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_OUTPUT_RANGE_MAX_DEFAULT_LENGTH 8 |
Definition at line 1837 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_OUTPUT_RANGE_MIN 329 |
This Information Element specifies the value for the beginning of a hash function's potential output range.
Definition at line 1830 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_OUTPUT_RANGE_MIN_DEFAULT_LENGTH 8 |
Definition at line 1831 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_SELECTED_RANGE_MAX 332 |
This Information Element specifies the value for the end of a hash function's selected range.
Definition at line 1847 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_SELECTED_RANGE_MAX_DEFAULT_LENGTH 8 |
Definition at line 1848 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_SELECTED_RANGE_MIN 331 |
This Information Element specifies the value for the beginning of a hash function's selected range.
Definition at line 1842 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HASH_SELECTED_RANGE_MIN_DEFAULT_LENGTH 8 |
Definition at line 1843 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_CONTENT_TYPE 469 |
The HTTP Content-Type header field as defined in section 3.1.1.5 of [RFC7231]. Encoded in UTF-8.
Definition at line 2791 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_CONTENT_TYPE_DEFAULT_LENGTH 64 |
Definition at line 2792 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_MESSAGE_VERSION 462 |
The version of an HTTP/1.1 message as indicated by the HTTP-version field, defined in section 2.6 of [RFC7230], or the version identification of an HTTP/2 frame as defined in [RFC7240] section 3.1. The length of this field is limited to 10 characters, UTF-8 encoded.
Definition at line 2745 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_MESSAGE_VERSION_DEFAULT_LENGTH 64 |
Definition at line 2746 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_REASON_PHRASE 470 |
The HTTP reason phrase as defined in section 6.1 of [RFC7231].
Definition at line 2796 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_REASON_PHRASE_DEFAULT_LENGTH 64 |
Definition at line 2797 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_REQUEST_HOST 460 |
The HTTP request host, as defined in section 5.4 of [RFC7230] or, in the case of HTTP/2, the content of the :authority pseudo-header field as defined in section 8.1.2.3 of [RFC7240]. Encoded in UTF-8.
Definition at line 2731 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_REQUEST_HOST_DEFAULT_LENGTH 64 |
Definition at line 2732 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_REQUEST_METHOD 459 |
The HTTP request method, as defined in section 4 of [RFC7231], associated with a flow. String with up to 8 UTF-8 characters.
Definition at line 2724 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_REQUEST_METHOD_DEFAULT_LENGTH 64 |
Definition at line 2725 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_REQUEST_TARGET 461 |
The HTTP request target, as defined in section 2 of [RFC7231] and in section 5.3 of [RFC7230], associated with a flow. Or the HTTP/2 ":path" pseudo-header field as defined in section 8.1.2.3 of [RFC7240]. Encoded in UTF-8.
Definition at line 2738 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_REQUEST_TARGET_DEFAULT_LENGTH 64 |
Definition at line 2739 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_STATUS_CODE 457 |
The HTTP Response Status Code, as defined in section 6 of [RFC7231], associated with a flow. Implies that the flow record represents a flow containing an HTTP Response.
Definition at line 2708 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_STATUS_CODE_DEFAULT_LENGTH 2 |
Definition at line 2709 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_USER_AGENT 468 |
The HTTP User-Agent header field as defined in section 5.5.3 of [RFC7231]. Encoded in UTF-8.
Definition at line 2786 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_HTTP_USER_AGENT_DEFAULT_LENGTH 64 |
Definition at line 2787 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_CODE_IPV4 177 |
Code of the IPv4 ICMP message.
Definition at line 820 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_CODE_IPV4_DEFAULT_LENGTH 1 |
Definition at line 821 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_CODE_IPV6 179 |
Code of the IPv6 ICMP message.
Definition at line 830 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_CODE_IPV6_DEFAULT_LENGTH 1 |
Definition at line 831 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_TYPE 32 |
Internet Control Message Protocol (ICMP) packet type; reported as ((ICMP Type*256) + ICMP code)
Definition at line 178 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_TYPE_CODE_IPV6 139 |
Type and Code of the IPv6 ICMP message. The combination of both values is reported as (ICMP type
Definition at line 583 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_TYPE_CODE_IPV6_DEFAULT_LENGTH 2 |
Definition at line 584 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_TYPE_DEFAULT_LENGTH 2 |
Definition at line 179 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_TYPE_IPV4 176 |
Type of the IPv4 ICMP message.
Definition at line 815 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_TYPE_IPV4_DEFAULT_LENGTH 1 |
Definition at line 816 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_TYPE_IPV6 178 |
Type of the IPv6 ICMP message.
Definition at line 825 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ICMP_TYPE_IPV6_DEFAULT_LENGTH 1 |
Definition at line 826 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IF_DESC 83 |
Full interface name i.e.: "'FastEthernet 1/0"
Definition at line 414 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IF_DESC_DEFAULT_LENGTH 64 |
Definition at line 415 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IF_NAME 82 |
Shortened interface name i.e.: "FE1/0"
Definition at line 409 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IF_NAME_DEFAULT_LENGTH 64 |
Definition at line 410 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_DATA_RECORD_TOTAL_COUNT 407 |
Description: The total number of received Data Records that the Intermediate Process did not process since the (re-)initialization of the Intermediate Process; includes only Data Records not examined or otherwise handled by the Intermediate Process due to resource constraints, not Data Records that were examined or otherwise handled by the Intermediate Process but those that merely do not contribute to any exported Data Record due to the operations performed by the Intermediate Process.
Definition at line 2356 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_DATA_RECORD_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2357 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_LAYER2_FRAME_TOTAL_COUNT 433 |
The total number of observed layer 2 frames that the Metering Process did not process since the (re-)initialization of the Metering Process. This Information Element is the layer 2 version of ignoredPacketTotalCount (ElementId #164).
Definition at line 2519 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_LAYER2_FRAME_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2520 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_LAYER2_OCTET_TOTAL_COUNT 426 |
The total number of octets in observed layer 2 packets (including the layer 2 header) that the Metering Process did not process since the (re-)initialization of the Metering Process.
Definition at line 2475 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_LAYER2_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2476 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_OCTET_TOTAL_COUNT 165 |
The total number of octets in observed IP packets (including the IP header) that the Metering Process did not process since the (re-)initialization of the Metering Process.
Definition at line 737 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 738 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_PACKET_TOTAL_COUNT 164 |
The total number of observed IP packets that the Metering Process did not process since the (re-)initialization of the Metering Process.
Definition at line 731 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IGNORED_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 732 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_BYTES 1 |
Incoming counter with length N x 8 bits for number of bytes associated with an IP Flow.
Definition at line 20 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_BYTES_DEFAULT_LENGTH 4 |
Definition at line 21 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_DST_MAC 80 |
Incoming destination MAC address
Definition at line 399 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_DST_MAC_DEFAULT_LENGTH 6 |
Definition at line 400 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_PERMANENT_BYTES 85 |
Running byte counter for a permanent flow
Definition at line 424 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_PERMANENT_BYTES_DEFAULT_LENGTH 4 |
Definition at line 425 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_PERMANENT_PKTS 86 |
Running packet counter for a permanent flow
Definition at line 429 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_PERMANENT_PKTS_DEFAULT_LENGTH 4 |
Definition at line 430 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_PKTS 2 |
Incoming counter with length N x 8 bits for the number of packets associated with an IP Flow
Definition at line 25 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_PKTS_DEFAULT_LENGTH 4 |
Definition at line 26 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_SRC_MAC 56 |
Incoming source MAC address
Definition at line 293 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IN_SRC_MAC_DEFAULT_LENGTH 6 |
Definition at line 294 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_DATA_TYPE 339 |
A description of the abstract data type of an IPFIX information element.These are taken from the abstract data types defined in section 3.1 of the IPFIX Information Model [RFC5102]; see that section for more information on the types described in the [informationElementDataType] subregistry.
Definition at line 1895 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_DATA_TYPE_DEFAULT_LENGTH 1 |
Definition at line 1896 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_DESCRIPTION 340 |
A UTF-8 [RFC3629] encoded Unicode string containing a human-readable description of an Information Element. The content of the informationElementDescription MAY be annotated with one or more language tags [RFC4646], encoded in-line [RFC2482] within the UTF-8 string, in order to specify the language in which the description is written. Description text in multiple languages MAY tag each section with its own language tag; in this case, the description information in each language SHOULD have equivalent meaning. In the absence of any language tag, the "i-default" [RFC2277] language SHOULD be assumed. See the Security Considerations section for notes on string handling for Information Element type records.
Definition at line 1907 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_DESCRIPTION_DEFAULT_LENGTH 64 |
Definition at line 1908 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_ID 303 |
This Information Element contains the ID of another Information Element.
Definition at line 1671 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_ID_DEFAULT_LENGTH 2 |
Definition at line 1672 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_INDEX 287 |
A zero-based index of an Information Element referenced by informationElementId within a Template referenced by templateId; used to disambiguate scope for templates containing multiple identical Information Elements.
Definition at line 1579 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_INDEX_DEFAULT_LENGTH 2 |
Definition at line 1580 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_NAME 341 |
A UTF-8 [RFC3629] encoded Unicode string containing the name of an Information Element, intended as a simple identifier. See the Security Considerations section for notes on string handling for Information Element type records
Definition at line 1914 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_NAME_DEFAULT_LENGTH 64 |
Definition at line 1915 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_RANGE_BEGIN 342 |
Contains the inclusive low end of the range of acceptable values for an Information Element.
Definition at line 1919 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_RANGE_BEGIN_DEFAULT_LENGTH 8 |
Definition at line 1920 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_RANGE_END 343 |
Contains the inclusive high end of the range of acceptable values for an Information Element.
Definition at line 1924 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_RANGE_END_DEFAULT_LENGTH 8 |
Definition at line 1925 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_SEMANTICS 344 |
A description of the semantics of an IPFIX Information Element. These are taken from the data type semantics defined in section 3.2 of the IPFIX Information Model [RFC5102]; see that section for more information on the types defined in the [IPFIX Information Element Semantics] subregistry. This field may take the values in the semantics registry; the special value 0x00 (default) is used to note that no semantics apply to the field; it cannot be manipulated by a Collecting Process or File Reader that does not understand it a priori.
Definition at line 1934 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_SEMANTICS_DEFAULT_LENGTH 1 |
Definition at line 1935 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_UNITS 345 |
A description of the units of an IPFIX Information Element. These correspond to the units implicitly defined in the Information Element definitions in section 5 of the IPFIX Information Model [RFC5102]; see that section for more information on the types described in the informationElementsUnits subregistry. This field may take the values in Table 3 below; the special value 0x00 (none) is used to note that the field is unitless.
Definition at line 1943 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INFORMATION_ELEMENT_UNITS_DEFAULT_LENGTH 2 |
Definition at line 1944 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_BROADCAST_PACKET_TOTAL_COUNT 356 |
The total number of incoming broadcast packets metered at the Observation Point since the Metering Process (re-)initialization for this Observation Point.
Definition at line 2019 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_BROADCAST_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2020 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_INTERFACE_TYPE 368 |
The type of interface where packets of this Flow are being received. The value matches the value of managed object 'ifType' as defined in [https://www.iana.org/assignments/ianaiftype-mib].
Definition at line 2089 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_INTERFACE_TYPE_DEFAULT_LENGTH 4 |
Definition at line 2090 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_MULTICAST_PACKET_TOTAL_COUNT 355 |
The total number of incoming multicast packets metered at the Observation Point since the Metering Process (re-)initialization for this Observation Point.
Definition at line 2013 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_MULTICAST_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2014 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_PHYSICAL_INTERFACE 252 |
The index of a networking device's physical interface (example, a switch port) where packets of this flow are being received.
Definition at line 1293 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_PHYSICAL_INTERFACE_DEFAULT_LENGTH 4 |
Definition at line 1294 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_UNICAST_PACKET_TOTAL_COUNT 354 |
The total number of incoming unicast packets metered at the Observation Point since the Metering Process (re-)initialization for this Observation Point.
Definition at line 2007 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_UNICAST_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2008 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_VRFID 234 |
An unique identifier of the VRFname where the packets of this flow are being received. This identifier is unique per Metering Process
Definition at line 1168 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INGRESS_VRFID_DEFAULT_LENGTH 4 |
Definition at line 1169 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INITIATOR_OCTETS 231 |
The total number of layer 4 payload bytes in a flow from the initiator since the previous report. The initiator is the device which triggered the session creation, and remains the same for the life of the session.
Definition at line 1149 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INITIATOR_OCTETS_DEFAULT_LENGTH 8 |
Definition at line 1150 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INITIATOR_PACKETS 298 |
The total number of layer 4 packets in a flow from the initiator since the previous report. The initiator is the device which triggered the session creation, and remains the same for the life of the session.
Definition at line 1640 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INITIATOR_PACKETS_DEFAULT_LENGTH 8 |
Definition at line 1641 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INPUT_SNMP 10 |
Input interface index; default for N is 2 but higher values could be used
Definition at line 66 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INPUT_SNMP_DEFAULT_LENGTH 2 |
Definition at line 67 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INTERMEDIATE_PROCESS_ID 406 |
Description: An identifier of an Intermediate Process that is unique per IPFIX Device. Typically, this Information Element is used for limiting the scope of other Information Elements. Note that process identifiers may be assigned dynamically; that is, an Intermediate Process may be restarted with a different ID.
Definition at line 2346 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INTERMEDIATE_PROCESS_ID_DEFAULT_LENGTH 4 |
Definition at line 2347 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INTERNAL_ADDRESS_REALM 464 |
This Information Element represents the internal address realm where the packet is originated from or destined to. By definition, a NAT mapping can be created from two address realms, one from internal and one from external. Realms are implementation dependent and can represent a Virtual Routing and Forwarding (VRF) ID, a VLAN ID, or some unique identifier. Realms are optional and, when left unspecified, would mean that the external and internal realms are the same.
Definition at line 2761 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_INTERNAL_ADDRESS_REALM_DEFAULT_LENGTH 3 |
Definition at line 2762 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_DIFF_SERV_CODE_POINT 195 |
The value of a Differentiated Services Code Point (DSCP) encoded in the Differentiated Services field. The Differentiated Services field spans the most significant 6 bits of the IPv4 TOS field or the IPv6 Traffic Class field, respectively.
Definition at line 923 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_DIFF_SERV_CODE_POINT_DEFAULT_LENGTH 1 |
Definition at line 924 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_HEADER_LENGTH 189 |
The length of the IP header. For IPv6, the value of this Information Element is 40.
Definition at line 884 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_HEADER_LENGTH_DEFAULT_LENGTH 1 |
Definition at line 885 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_HEADER_PACKET_SECTION 313 |
This Information Element carries a series of n octets from the IP header of a sampled packet, starting sectionOffset octets into the IP header.
Definition at line 1733 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_HEADER_PACKET_SECTION_DEFAULT_LENGTH 3 |
Definition at line 1734 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_PAYLOAD_LENGTH 204 |
The effective length of the IP payload.
Definition at line 974 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_PAYLOAD_LENGTH_DEFAULT_LENGTH 4 |
Definition at line 975 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_PAYLOAD_PACKET_SECTION 314 |
This Information Element carries a series of n octets from the IP payload of a sampled packet, starting sectionOffset octets into the IP payload.
Definition at line 1739 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_PAYLOAD_PACKET_SECTION_DEFAULT_LENGTH 3 |
Definition at line 1740 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_PRECEDENCE 196 |
The value of the IP Precedence. The IP Precedence value is encoded in the first 3 bits of the IPv4 TOS field or the IPv6 Traffic Class field, respectively.
Definition at line 929 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_PRECEDENCE_DEFAULT_LENGTH 1 |
Definition at line 930 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_PROTOCOL_VERSION 60 |
Internet Protocol Version Set to 4 for IPv4, set to 6 for IPv6. If not present in the template, then version 4 is assumed.
Definition at line 314 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_PROTOCOL_VERSION_DEFAULT_LENGTH 1 |
Definition at line 315 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_TOTAL_LENGTH 224 |
The total length of the IP packet.
Definition at line 1097 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_TOTAL_LENGTH_DEFAULT_LENGTH 8 |
Definition at line 1098 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_TTL 192 |
For IPv4, the value of the Information Element matches the value of the Time to Live (TTL) field in the IPv4 packet header. For IPv6, the value of the Information Element matches the value of the Hop Limit field in the IPv6 packet header.
Definition at line 904 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IP_TTL_DEFAULT_LENGTH 1 |
Definition at line 905 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPSEC_SPI 295 |
IPSec Security Parameters Index (SPI).
Definition at line 1622 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPSEC_SPI_DEFAULT_LENGTH 4 |
Definition at line 1623 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_DST_ADDR 12 |
IPv4 destination address
Definition at line 76 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_DST_ADDR_DEFAULT_LENGTH 4 |
Definition at line 77 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_DST_PREFIX 45 |
IPv4 destination address prefix (specific for Catalyst architecture)
Definition at line 242 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_DST_PREFIX_DEFAULT_LENGTH 4 |
Definition at line 243 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_IDENT 54 |
The IP v4 identification field
Definition at line 283 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_IDENT_DEFAULT_LENGTH 2 |
Definition at line 284 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_IHL 207 |
The value of the Internet Header Length (IHL) field in the IPv4 header. It specifies the length of the header in units of 4 octets. Please note that its unit is different from most of the other Information Elements reporting length values.
Definition at line 992 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_IHL_DEFAULT_LENGTH 1 |
Definition at line 993 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_NEXT_HOP 15 |
IPv4 address of next-hop router
Definition at line 92 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_NEXT_HOP_DEFAULT_LENGTH 4 |
Definition at line 93 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_OPTIONS 208 |
IPv4 options in packets of this Flow. The information is encoded in a set of bit fields. For each valid IPv4 option type, there is a bit in this set. The bit is set to 1 if any observed packet of this Flow contains the corresponding IPv4 option type. Otherwise, if no observed packet of this Flow contained the respective IPv4 option type, the value of the corresponding bit is 0.
Definition at line 1000 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_OPTIONS_DEFAULT_LENGTH 4 |
Definition at line 1001 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_SRC_ADDR 8 |
IPv4 source address
Definition at line 55 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_SRC_ADDR_DEFAULT_LENGTH 4 |
Definition at line 56 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_SRC_PREFIX 44 |
IPv4 source address prefix (specific for Catalyst architecture)
Definition at line 237 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV4_SRC_PREFIX_DEFAULT_LENGTH 4 |
Definition at line 238 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_DST_ADDR 28 |
IPv6 Destination Address
Definition at line 158 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_DST_ADDR_DEFAULT_LENGTH 16 |
Definition at line 159 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_DST_MASK 30 |
Length of the IPv6 destination mask in contiguous bits
Definition at line 168 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_DST_MASK_DEFAULT_LENGTH 1 |
Definition at line 169 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_FLOW_LABEL 31 |
IPv6 flow label as per RFC 2460 definition
Definition at line 173 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_FLOW_LABEL_DEFAULT_LENGTH 3 |
Definition at line 174 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_NEXT_HOP 62 |
IPv6 address of the next-hop router
Definition at line 324 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_NEXT_HOP_DEFAULT_LENGTH 16 |
Definition at line 325 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_OPTION_HEADERS 64 |
Bit-encoded field identifying IPv6 option headers found in the flow
Definition at line 334 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_OPTION_HEADERS_DEFAULT_LENGTH 4 |
Definition at line 335 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_SRC_ADDR 27 |
IPv6 Source Address
Definition at line 153 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_SRC_ADDR_DEFAULT_LENGTH 16 |
Definition at line 154 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_SRC_MASK 29 |
Length of the IPv6 source mask in contiguous bits
Definition at line 163 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IPV6_SRC_MASK_DEFAULT_LENGTH 1 |
Definition at line 164 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IS_MULTICAST 206 |
If the IP destination address is not a reserved multicast address, then the value of all bits of the octet (including the reserved ones) is zero.
Definition at line 985 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_IS_MULTICAST_DEFAULT_LENGTH 1 |
Definition at line 986 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_L4_DST_PORT 11 |
TCP/UDP destination port number i.e.: FTP, Telnet, or equivalent
Definition at line 71 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_L4_DST_PORT_DEFAULT_LENGTH 2 |
Definition at line 72 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_L4_SRC_PORT 7 |
TCP/UDP source port number i.e.: FTP, Telnet, or equivalent
Definition at line 50 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_L4_SRC_PORT_DEFAULT_LENGTH 2 |
Definition at line 51 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAST_SWITCHED 21 |
System uptime at which the last packet of this flow was switched
Definition at line 123 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAST_SWITCHED_DEFAULT_LENGTH 4 |
Definition at line 124 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_FRAME_DELTA_COUNT 430 |
The number of incoming layer 2 frames since the previous report (if any) for this Flow at the Observation Point.
Definition at line 2501 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_FRAME_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2502 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_FRAME_TOTAL_COUNT 431 |
The total number of incoming layer 2 frames for this Flow at the Observation Point since the Metering Process (re-)initialization for this Observation Point.
Definition at line 2507 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_FRAME_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2508 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_OCTET_DELTA_COUNT 352 |
The number of layer 2 octets since the previous report (if any) in incoming packets for this Flow at the Observation Point. The number of octets includes layer 2 header(s) and layer 2 payload. # memo: layer 2 version of octetDeltaCount (field #1)
Definition at line 1993 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_OCTET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 1994 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_OCTET_DELTA_SUM_OF_SQUARES 428 |
The sum of the squared numbers of layer 2 octets per incoming packet since the previous report (if any) for this Flow at the Observation Point. The number of octets includes layer 2 header(s) and layer 2 payload.
Definition at line 2488 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_OCTET_DELTA_SUM_OF_SQUARES_DEFAULT_LENGTH 8 |
Definition at line 2489 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_OCTET_TOTAL_COUNT 353 |
The total number of layer 2 octets in incoming packets for this Flow at the Observation Point since the Metering Process (re-)initialization for this Observation Point. The number of octets includes layer 2 header(s) and layer 2 payload. # memo: layer 2 version of octetTotalCount (field #85)
Definition at line 2001 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2002 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_OCTET_TOTAL_SUM_OF_SQUARES 429 |
The total sum of the squared numbers of layer 2 octets in incoming packets for this Flow at the Observation Point since the Metering Process (re-)initialization for this Observation Point. The number of octets includes layer 2 header(s) and layer 2 payload.
Definition at line 2495 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_OCTET_TOTAL_SUM_OF_SQUARES_DEFAULT_LENGTH 8 |
Definition at line 2496 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_SEGMENT_ID 351 |
Identifier of a layer 2 network segment in an overlay network. The most significant byte identifies the layer 2 network overlay network encapsulation type:
Definition at line 1986 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER2_SEGMENT_ID_DEFAULT_LENGTH 8 |
Definition at line 1987 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER_2_PACKET_SECTION_DATA 104 |
Layer 2 packet section data.
Definition at line 501 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER_2_PACKET_SECTION_DATA_DEFAULT_LENGTH 3 |
Definition at line 502 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER_2_PACKET_SECTION_OFFSET 102 |
Layer 2 packet section offset. Potentially a generic offset.
Definition at line 491 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER_2_PACKET_SECTION_OFFSET_DEFAULT_LENGTH 2 |
Definition at line 492 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER_2_PACKET_SECTION_SIZE 103 |
Layer 2 packet section size. Potentially a generic size.
Definition at line 496 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LAYER_2_PACKET_SECTION_SIZE_DEFAULT_LENGTH 2 |
Definition at line 497 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LINE_CARD_ID 141 |
An identifier of a line card that is unique per IPFIX Device hosting an Observation Point. Typically, this Information Element is used for limiting the scope of other Information Elements.
Definition at line 594 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LINE_CARD_ID_DEFAULT_LENGTH 4 |
Definition at line 595 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LOWER_CILIMIT 337 |
This Information Element specifies the lower limit of a confidence interval. For further information, see the description of upperCILimit.
Definition at line 1879 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_LOWER_CILIMIT_DEFAULT_LENGTH 8 |
Definition at line 1880 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_BIBENTRIES 472 |
This element represents the maximum BIB entries that can be created by the NAT device.
Definition at line 2806 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_BIBENTRIES_DEFAULT_LENGTH 4 |
Definition at line 2807 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_ENTRIES_PER_USER 473 |
This element represents the maximum NAT entries that can be created per user by the NAT device.
Definition at line 2811 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_ENTRIES_PER_USER_DEFAULT_LENGTH 4 |
Definition at line 2812 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_EXPORT_SECONDS 260 |
The absolute Export Time of the latest IPFIX Message within the scope containing this Information Element. This Information Element SHOULD be bound to its containing IPFIX Transport Session via IPFIX Options and the sessionScope Information Element.
Definition at line 1347 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_EXPORT_SECONDS_DEFAULT_LENGTH 4 |
Definition at line 1348 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FLOW_END_MICROSECONDS 268 |
The latest absolute timestamp of the last packet within any Flow within the scope containing this Information Element, rounded up to the microsecond if necessary. This Information Element SHOULD be bound to its containing IPFIX Transport Session via IPFIX Options and the sessionScope Information Element. This Information Element SHOULD be used only in Transport Sessions containing Flow Records with microsecond- precision (or better) timestamp Information Elements.
Definition at line 1424 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FLOW_END_MICROSECONDS_DEFAULT_LENGTH 8 |
Definition at line 1425 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FLOW_END_MILLISECONDS 269 |
The latest absolute timestamp of the last packet within any Flow within the scope containing this Information Element, rounded up to the millisecond if necessary. This Information Element SHOULD be bound to its containing IPFIX Transport Session via IPFIX Options and the sessionScope Information Element. This Information Element SHOULD be used only in Transport Sessions containing Flow Records with millisecond- precision (or better) timestamp Information Elements.
Definition at line 1433 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FLOW_END_MILLISECONDS_DEFAULT_LENGTH 8 |
Definition at line 1434 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FLOW_END_NANOSECONDS 270 |
The latest absolute timestamp of the last packet within any Flow within the scope containing this Information Element. This Information Element SHOULD be bound to its containing IPFIX Transport Session via IPFIX Options and the sessionScope Information Element. This Information Element SHOULD be used only in Transport Sessions containing Flow Records with nanosecond-precision timestamp Information Elements.
Definition at line 1442 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FLOW_END_NANOSECONDS_DEFAULT_LENGTH 8 |
Definition at line 1443 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FLOW_END_SECONDS 261 |
The latest absolute timestamp of the last packet within any Flow within the scope containing this Information Element, rounded up to the second if necessary. This Information Element SHOULD be bound to its containing IPFIX Transport Session via IPFIX Options and the sessionScope Information Element.
Definition at line 1355 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FLOW_END_SECONDS_DEFAULT_LENGTH 4 |
Definition at line 1356 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FRAGMENTS_PENDING_REASSEMBLY 475 |
This element represents the maximum fragments that the NAT device can store for reassembling the packet.
Definition at line 2823 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_FRAGMENTS_PENDING_REASSEMBLY_DEFAULT_LENGTH 4 |
Definition at line 2824 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_LAYER2_TOTAL_LENGTH 423 |
Layer 2 length of the largest packet observed for this Flow. The packet length includes the length of the layer 2 header(s) and the length of the layer 2 payload.
Definition at line 2457 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_LAYER2_TOTAL_LENGTH_DEFAULT_LENGTH 8 |
Definition at line 2458 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_PKT_LENGTH 26 |
Maximum IP packet length on incoming packets of the flow
Definition at line 148 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_PKT_LENGTH_DEFAULT_LENGTH 2 |
Definition at line 149 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_SESSION_ENTRIES 471 |
This element represents the maximum session entries that can be created by the NAT device.
Definition at line 2801 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_SESSION_ENTRIES_DEFAULT_LENGTH 4 |
Definition at line 2802 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_SUBSCRIBERS 474 |
This element represents the maximum subscribers or maximum hosts that are allowed by the NAT device.
Definition at line 2817 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_SUBSCRIBERS_DEFAULT_LENGTH 4 |
Definition at line 2818 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_TTL 53 |
Maximum TTL on incoming packets of the flow
Definition at line 278 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MAX_TTL_DEFAULT_LENGTH 1 |
Definition at line 279 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MESSAGE_MD5_CHECKSUM 262 |
The MD5 checksum of the IPFIX Message containing this record. This Information Element SHOULD be bound to its containing IPFIX Message via an options record and the messageScope Information Element, as defined below, and SHOULD appear only once in a given IPFIX Message. To calculate the value of this Information Element, first buffer the containing IPFIX Message, setting the value of this Information Element to all zeroes. Then calculate the MD5 checksum of the resulting buffer as defined in [RFC1321], place the resulting value in this Information Element, and export the buffered message. This Information Element is intended as a simple checksum only; therefore collision resistance and algorithm agility are not required, and MD5 is an appropriate message digest. This Information Element has a fixed length of 16 octets.
Definition at line 1368 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MESSAGE_MD5_CHECKSUM_DEFAULT_LENGTH 3 |
Definition at line 1369 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MESSAGE_SCOPE 263 |
The presence of this Information Element as scope in an Options Template signifies that the options described by the Template apply to the IPFIX Message that contains them. It is defined for general purpose message scoping of options, and proposed specifically to allow the attachment a checksum to a message via IPFIX Options. The value of this Information Element MUST be written as 0 by the File Writer or Exporting Process. The value of this Information Element MUST be ignored by the File Reader or the Collecting Process.
Definition at line 1378 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MESSAGE_SCOPE_DEFAULT_LENGTH 1 |
Definition at line 1379 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_METERING_PROCESS_ID 143 |
An identifier of a Metering Process that is unique per IPFIX Device. Typically, this Information Element is used for limiting the scope of other Information Elements. Note that process identifiers are typically assigned dynamically. The Metering Process may be re-started with a different ID.
Definition at line 608 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_METERING_PROCESS_ID_DEFAULT_LENGTH 4 |
Definition at line 609 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_METRO_EVC_ID 247 |
The EVC Service Attribute which uniquely identifies the Ethernet Virtual Connection (EVC) within a Metro Ethernet Network, as defined in section 6.2 of MEF 10.1. The MetroEVCID is encoded in a string of up to 100 characters.
Definition at line 1265 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_METRO_EVC_ID_DEFAULT_LENGTH 64 |
Definition at line 1266 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_METRO_EVC_TYPE 248 |
The 3-bit EVC Service Attribute which identifies the type of service provided by an EVC.
Definition at line 1270 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_METRO_EVC_TYPE_DEFAULT_LENGTH 1 |
Definition at line 1271 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_CAPTURE_TIME_SEMANTICS 448 |
Indicates when in the lifetime of the Flow the MIB value was retrieved from the MIB for a mibObjectIdentifier. This is used to indicate if the value exported was collected from the MIB closer to Flow creation or Flow export time and refers to the Timestamp fields included in the same Data Record. This field SHOULD be used when exporting a mibObjectValue that specifies counters or statistics.
Definition at line 2657 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_CAPTURE_TIME_SEMANTICS_DEFAULT_LENGTH 1 |
Definition at line 2658 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_CONTEXT_ENGINE_ID 449 |
A mibContextEngineID that specifies the SNMP engine ID for a MIB field being exported over IPFIX. Definition as per [RFC3411], Section 3.3.
Definition at line 2663 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_CONTEXT_ENGINE_ID_DEFAULT_LENGTH 3 |
Definition at line 2664 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_CONTEXT_NAME 450 |
An Information Element that denotes that a MIB context name is specified for a MIB field being exported over IPFIX. Reference [RFC3411], Section 3.3.
Definition at line 2669 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_CONTEXT_NAME_DEFAULT_LENGTH 64 |
Definition at line 2670 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_INDEX_INDICATOR 447 |
A set of bit fields that is used for marking the Information Elements of a Data Record that serve as INDEX MIB objects for an indexed columnar MIB object. Each bit represents an Information Element in the Data Record, with the n-th least significant bit representing the n-th Information Element. A bit set to 1 indicates that the corresponding Information Element is an index of the columnar object represented by the mibObjectValue. A bit set to 0 indicates that this is not the case.
Definition at line 2648 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_INDEX_INDICATOR_DEFAULT_LENGTH 8 |
Definition at line 2649 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_MODULE_NAME 454 |
The textual name of the MIB module that defines a MIB object.
Definition at line 2690 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_MODULE_NAME_DEFAULT_LENGTH 64 |
Definition at line 2691 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_DESCRIPTION 452 |
The value of the DESCRIPTION clause of a MIB object type definition.
Definition at line 2679 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_DESCRIPTION_DEFAULT_LENGTH 64 |
Definition at line 2680 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_IDENTIFIER 445 |
An IPFIX Information Element that denotes that a MIB Object Identifier (MIB OID) is exported in the (Options) Template Record. The mibObjectIdentifier Information Element contains the OID assigned to the MIB object type definition encoded as ASN.1/BER [X.690].
Definition at line 2633 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_IDENTIFIER_DEFAULT_LENGTH 3 |
Definition at line 2634 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_NAME 451 |
The name (called a descriptor in [RFC2578] of an object type definition.
Definition at line 2674 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_NAME_DEFAULT_LENGTH 64 |
Definition at line 2675 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_SYNTAX 453 |
The value of the SYNTAX clause of a MIB object type definition, which may include a textual convention or sub-typing. See [RFC2578].
Definition at line 2685 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_SYNTAX_DEFAULT_LENGTH 64 |
Definition at line 2686 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_BITS 437 |
An IPFIX Information Element that denotes that a set of Enumerated flags or bits from a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of BITS. The flags or bits are encoded as per the standard IPFIX Abstract Data Type of octetArray, with sufficient length to accommodate the required number of bits. If the number of bits is not an integer multiple of octets, then the most significant bits at the end of the octetArray MUST be set to 0.
Definition at line 2559 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_BITS_DEFAULT_LENGTH 3 |
Definition at line 2560 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_COUNTER 439 |
An IPFIX Information Element that denotes that the counter value of a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of Counter32 or Counter64 with IPFIX reduced-size encoding used as required. The value is encoded as per the standard IPFIX Abstract Data Type of unsigned64.
Definition at line 2577 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_COUNTER_DEFAULT_LENGTH 8 |
Definition at line 2578 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_GAUGE 440 |
An IPFIX Information Element that denotes that the Gauge value of a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of Gauge32. The value is encoded as per the standard IPFIX Abstract Data Type of unsigned32. This value represents a non-negative integer that may increase or decrease but that shall never exceed a maximum value or fall below a minimum value.
Definition at line 2587 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_GAUGE_DEFAULT_LENGTH 4 |
Definition at line 2588 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_INTEGER 434 |
An IPFIX Information Element that denotes that the integer value of a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of Integer32 and INTEGER with IPFIX reduced-size encoding used as required. The value is encoded as per the standard IPFIX Abstract Data Type of signed32.
Definition at line 2528 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_INTEGER_DEFAULT_LENGTH 4 |
Definition at line 2529 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_IPADDRESS 438 |
An IPFIX Information Element that denotes that the IPv4 address value of a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of IpAddress. The value is encoded as per the standard IPFIX Abstract Data Type of ipv4Address.
Definition at line 2568 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_IPADDRESS_DEFAULT_LENGTH 4 |
Definition at line 2569 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_OCTET_STRING 435 |
An IPFIX Information Element that denotes that an Octet String or Opaque value of a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of OCTET STRING and Opaque. The value is encoded as per the standard IPFIX Abstract Data Type of octetArray.
Definition at line 2537 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_OCTET_STRING_DEFAULT_LENGTH 3 |
Definition at line 2538 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_OID 436 |
An IPFIX Information Element that denotes that an Object Identifier or OID value of a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of OBJECT IDENTIFIER. Note: In this case, the "mibObjectIdentifier" defines which MIB object is being exported, and the "mibObjectValueOID" field will contain the OID value of that MIB object. The mibObjectValueOID Information Element is encoded as ASN.1/BER [X.690] in an octetArray.
Definition at line 2548 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_OID_DEFAULT_LENGTH 3 |
Definition at line 2549 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_ROW 444 |
An IPFIX Information Element that denotes that a single row of a conceptual table will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with a syntax of SEQUENCE. This is encoded as a subTemplateList of mibObjectValue Information Elements. The subTemplateList exported MUST contain exactly one row (i.e., one instance of the subTemplate). The Template specified in the subTemplateList MUST be an Options Template and MUST include all the objects listed in the INDEX clause as Scope Fields.
Definition at line 2626 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_ROW_DEFAULT_LENGTH 64 |
Definition at line 2627 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_TABLE 443 |
An IPFIX Information Element that denotes that a complete or partial conceptual table will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with a syntax of SEQUENCE OF. This is encoded as a subTemplateList of mibObjectValue Information Elements. The Template specified in the subTemplateList MUST be an Options Template and MUST include all the objects listed in the INDEX clause as Scope Fields.
Definition at line 2615 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_TABLE_DEFAULT_LENGTH 64 |
Definition at line 2616 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_TIME_TICKS 441 |
An IPFIX Information Element that denotes that the TimeTicks value of a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of TimeTicks. The value is encoded as per the standard IPFIX Abstract Data Type of unsigned32.
Definition at line 2596 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_TIME_TICKS_DEFAULT_LENGTH 4 |
Definition at line 2597 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_UNSIGNED 442 |
An IPFIX Information Element that denotes that an unsigned integer value of a MIB object will be exported. The MIB Object Identifier ("mibObjectIdentifier") for this field MUST be exported in a MIB Field Option or via another means. This Information Element is used for MIB objects with the Base syntax of unsigned32 with IPFIX reduced-size encoding used as required. The value is encoded as per the standard IPFIX Abstract Data Type of unsigned32.
Definition at line 2605 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_OBJECT_VALUE_UNSIGNED_DEFAULT_LENGTH 4 |
Definition at line 2606 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_SUB_IDENTIFIER 446 |
A non-negative sub-identifier of an Object Identifier (OID).
Definition at line 2638 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIB_SUB_IDENTIFIER_DEFAULT_LENGTH 4 |
Definition at line 2639 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_EXPORT_SECONDS 264 |
The absolute Export Time of the earliest IPFIX Message within the scope containing this Information Element. This Information Element SHOULD be bound to its containing IPFIX Transport Session via an options record and the sessionScope Information Element.
Definition at line 1385 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_EXPORT_SECONDS_DEFAULT_LENGTH 4 |
Definition at line 1386 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_FLOW_START_MICROSECONDS 271 |
The earliest absolute timestamp of the first packet within any Flow within the scope containing this Information Element, rounded down to the microsecond if necessary. This Information Element SHOULD be bound to its containing IPFIX Transport Session via an options record and the sessionScope Information Element. This Information Element SHOULD be used only in Transport Sessions containing Flow Records with microsecond- precision (or better) timestamp Information Elements.
Definition at line 1452 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_FLOW_START_MICROSECONDS_DEFAULT_LENGTH 8 |
Definition at line 1453 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_FLOW_START_MILLISECONDS 272 |
The earliest absolute timestamp of the first packet within any Flow within the scope containing this Information Element, rounded down to the millisecond if necessary. This Information Element SHOULD be bound to its containing IPFIX Transport Session via an options record and the sessionScope Information Element. This Information Element SHOULD be used only in Transport Sessions containing Flow Records with millisecond- precision (or better) timestamp Information Elements.
Definition at line 1462 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_FLOW_START_MILLISECONDS_DEFAULT_LENGTH 8 |
Definition at line 1463 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_FLOW_START_NANOSECONDS 273 |
The earliest absolute timestamp of the first packet within any Flow within the scope containing this Information Element. This Information Element SHOULD be bound to its containing IPFIX Transport Session via an options record and the sessionScope Information Element. This Information Element SHOULD be used only in Transport Sessions containing Flow Records with nanosecond-precision timestamp Information Elements.
Definition at line 1471 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_FLOW_START_NANOSECONDS_DEFAULT_LENGTH 8 |
Definition at line 1472 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_FLOW_START_SECONDS 265 |
The earliest absolute timestamp of the first packet within any Flow within the scope containing this Information Element, rounded down to the second if necessary. This Information Element SHOULD be bound to its containing IPFIX Transport Session via an options record and the sessionScope Information Element.
Definition at line 1393 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_FLOW_START_SECONDS_DEFAULT_LENGTH 4 |
Definition at line 1394 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_LAYER2_TOTAL_LENGTH 422 |
Layer 2 length of the smallest packet observed for this Flow. The packet length includes the length of the layer 2 header(s) and the length of the layer 2 payload.
Definition at line 2451 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_LAYER2_TOTAL_LENGTH_DEFAULT_LENGTH 8 |
Definition at line 2452 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_PKT_LENGTH 25 |
Minimum IP packet length on incoming packets of the flow
Definition at line 143 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_PKT_LENGTH_DEFAULT_LENGTH 2 |
Definition at line 144 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_TTL 52 |
Minimum TTL on incoming packets of the flow
Definition at line 273 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MIN_TTL_DEFAULT_LENGTH 1 |
Definition at line 274 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MOBILE_IMSI 455 |
The International Mobile Subscription Identity (IMSI). The IMSI is a decimal digit string with up to a maximum of 15 ASCII/UTF-8 encoded digits (0x30 - 0x39).
Definition at line 2696 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MOBILE_IMSI_DEFAULT_LENGTH 64 |
Definition at line 2697 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MOBILE_MSISDN 456 |
The Mobile Station International Subscriber Directory Number (MSISDN). The MSISDN is a decimal digit string with up to a maximum of 15 ASCII/UTF-8 encoded digits (0x30 - 0x39).
Definition at line 2702 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MOBILE_MSISDN_DEFAULT_LENGTH 64 |
Definition at line 2703 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MONITORING_INTERVAL_END_MILLI_SECONDS 360 |
The absolute timestamp at which the monitoring interval ended. A Monitoring interval is the period of time during which the Metering Process is running.
Definition at line 2043 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MONITORING_INTERVAL_END_MILLI_SECONDS_DEFAULT_LENGTH 8 |
Definition at line 2044 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MONITORING_INTERVAL_START_MILLI_SECONDS 359 |
The absolute timestamp at which the monitoring interval started. A Monitoring interval is the period of time during which the Metering Process is running.
Definition at line 2037 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MONITORING_INTERVAL_START_MILLI_SECONDS_DEFAULT_LENGTH 8 |
Definition at line 2038 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_1 70 |
MPLS label at position 1 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 340 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_10 79 |
MPLS label at position 10 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 394 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_10_DEFAULT_LENGTH 3 |
Definition at line 395 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_1_DEFAULT_LENGTH 3 |
Definition at line 341 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_2 71 |
MPLS label at position 2 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 346 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_2_DEFAULT_LENGTH 3 |
Definition at line 347 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_3 72 |
MPLS label at position 3 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 352 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_3_DEFAULT_LENGTH 3 |
Definition at line 353 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_4 73 |
MPLS label at position 4 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 358 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_4_DEFAULT_LENGTH 3 |
Definition at line 359 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_5 74 |
MPLS label at position 5 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 364 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_5_DEFAULT_LENGTH 3 |
Definition at line 365 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_6 75 |
MPLS label at position 6 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 370 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_6_DEFAULT_LENGTH 3 |
Definition at line 371 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_7 76 |
MPLS label at position 7 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 376 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_7_DEFAULT_LENGTH 3 |
Definition at line 377 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_8 77 |
MPLS label at position 8 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 382 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_8_DEFAULT_LENGTH 3 |
Definition at line 383 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_9 78 |
MPLS label at position 9 in the stack. This comprises 20 bits of MPLS label, 3 EXP (experimental) bits and 1 S (end-of-stack) bit.
Definition at line 388 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_9_DEFAULT_LENGTH 3 |
Definition at line 389 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_STACK_DEPTH 202 |
The number of labels in the MPLS label stack.
Definition at line 964 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_STACK_DEPTH_DEFAULT_LENGTH 4 |
Definition at line 965 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_STACK_LENGTH 201 |
The length of the MPLS label stack in units of octets.
Definition at line 959 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_STACK_LENGTH_DEFAULT_LENGTH 4 |
Definition at line 960 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_STACK_SECTION 316 |
This Information Element carries a series of n octets from the MPLS label stack of a sampled packet, starting sectionOffset octets into the MPLS label stack.
Definition at line 1751 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_LABEL_STACK_SECTION_DEFAULT_LENGTH 3 |
Definition at line 1752 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_PAL_RD 90 |
MPLS PAL Route Distinguisher.
Definition at line 445 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_PAL_RD_DEFAULT_LENGTH 8 |
Definition at line 446 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_PAYLOAD_LENGTH 194 |
The size of the MPLS packet without the label stack.
Definition at line 916 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_PAYLOAD_LENGTH_DEFAULT_LENGTH 4 |
Definition at line 917 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_PAYLOAD_PACKET_SECTION 317 |
The mplsPayloadPacketSection carries a series of n octets from the MPLS payload of a sampled packet, starting sectionOffset octets into the MPLS payload, as it is data that follows immediately after the MPLS label stack.
Definition at line 1758 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_PAYLOAD_PACKET_SECTION_DEFAULT_LENGTH 3 |
Definition at line 1759 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_PREFIX_LEN 91 |
Number of consecutive bits in the MPLS prefix length.
Definition at line 450 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_PREFIX_LEN_DEFAULT_LENGTH 1 |
Definition at line 451 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_EXP 203 |
The Exp field from the top MPLS label stack entry, i.e., the last label that was pushed.
Definition at line 969 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_EXP_DEFAULT_LENGTH 1 |
Definition at line 970 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_IP_ADDR 47 |
Forwarding Equivalent Class corresponding to the MPLS Top Label
Definition at line 252 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_IP_ADDR_DEFAULT_LENGTH 4 |
Definition at line 253 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_IPV6_ADDRESS 140 |
The IPv6 address of the system that the MPLS top label will cause this Flow to be forwarded to.
Definition at line 588 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_IPV6_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 589 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_TTL 200 |
The TTL field from the top MPLS label stack entry, i.e., the last label that was pushed.
Definition at line 954 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_TTL_DEFAULT_LENGTH 1 |
Definition at line 955 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_TYPE 46 |
MPLS Top Label Type: 0x00 UNKNOWN 0x01 TE-MIDPT 0x02 ATOM 0x03 VPN 0x04 BGP 0x05 LDP
Definition at line 247 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MPLS_TOP_LABEL_TYPE_DEFAULT_LENGTH 1 |
Definition at line 248 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MUL_DST_BYTES 20 |
IP multicast outgoing byte counter with length N x 8 bits for bytes associated with the IP Flow
Definition at line 118 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MUL_DST_BYTES_DEFAULT_LENGTH 4 |
Definition at line 119 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MUL_DST_PKTS 19 |
IP multicast outgoing packet counter with length N x 8 bits for packets associated with the IP Flow
Definition at line 113 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MUL_DST_PKTS_DEFAULT_LENGTH 4 |
Definition at line 114 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MUL_IGMP_TYPE 33 |
Internet Group Management Protocol (IGMP) packet type
Definition at line 183 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_MUL_IGMP_TYPE_DEFAULT_LENGTH 1 |
Definition at line 184 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_EVENT 230 |
This Information Element identifies a NAT event. This IE identifies the type of a NAT event. Examples of NAT events include, but are not limited to, NAT translation create, NAT translation delete, Threshold Reached, or Threshold Exceeded, etc. Values for this Information Element are listed in the "NAT Event Type" registry, see [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-nat-event-type].
Definition at line 1142 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_EVENT_DEFAULT_LENGTH 1 |
Definition at line 1143 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_INSTANCE_ID 463 |
This Information Element uniquely identifies an Instance of the NAT that runs on a NAT middlebox function after the packet passes the Observation Point. natInstanceID is defined in [RFC7659].
Definition at line 2751 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_INSTANCE_ID_DEFAULT_LENGTH 4 |
Definition at line 2752 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_ORIGINATING_ADDRESS_REALM 229 |
Indicates whether the session was created because traffic originated in the private or public address realm. postNATSourceIPv4Address, postNATDestinationIPv4Address, postNAPTSourceTransportPort, and postNAPTDestinationTransportPort are qualified with the address realm in perspective.
Definition at line 1133 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_ORIGINATING_ADDRESS_REALM_DEFAULT_LENGTH 1 |
Definition at line 1134 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_POOL_ID 283 |
Locally unique identifier of a NAT pool.
Definition at line 1550 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_POOL_ID_DEFAULT_LENGTH 4 |
Definition at line 1551 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_POOL_NAME 284 |
The name of a NAT pool identified by a natPoolID.
Definition at line 1555 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_POOL_NAME_DEFAULT_LENGTH 64 |
Definition at line 1556 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_QUOTA_EXCEEDED_EVENT 466 |
This Information Element identifies the type of a NAT Quota Exceeded event. Values for this Information Element are listed in the "NAT Quota Exceeded Event Type" registry, see [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-nat-quota-exceeded-event].
Definition at line 2774 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_QUOTA_EXCEEDED_EVENT_DEFAULT_LENGTH 4 |
Definition at line 2775 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_THRESHOLD_EVENT 467 |
This Information Element identifies a type of a NAT Threshold event. Values for this Information Element are listed in the "NAT Threshold Event Type" registry, see [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-nat-threshold-event].
Definition at line 2781 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_THRESHOLD_EVENT_DEFAULT_LENGTH 4 |
Definition at line 2782 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_TYPE 297 |
Values are listed in the natType registry. See [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-nat-type].
Definition at line 1633 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NAT_TYPE_DEFAULT_LENGTH 1 |
Definition at line 1634 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NEW_CONNECTION_DELTA_COUNT 278 |
This information element counts the number of TCP or UDP connections which were opened during the observation period. The observation period may be specified by the flow start and end timestamps.
Definition at line 1511 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NEW_CONNECTION_DELTA_COUNT_DEFAULT_LENGTH 4 |
Definition at line 1512 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NEXT_HEADER_IPV6 193 |
The value of the Next Header field of the IPv6 header. The value identifies the type of the following IPv6 extension header or of the following IP payload. Valid values are defined in the IANA Protocol Numbers registry.
Definition at line 911 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NEXT_HEADER_IPV6_DEFAULT_LENGTH 1 |
Definition at line 912 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NOT_SENT_FLOW_TOTAL_COUNT 166 |
The total number of Flow Records that were generated by the Metering Process and dropped by the Metering Process or by the Exporting Process instead of being sent to the Collecting Process. There are several potential reasons for this including resource shortage and special Flow export policies.
Definition at line 745 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NOT_SENT_FLOW_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 746 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NOT_SENT_LAYER2_OCTET_TOTAL_COUNT 427 |
The total number of octets in observed layer 2 packets (including the layer 2 header) that the Metering Process did not process since the (re-)initialization of the Metering Process.
Definition at line 2481 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NOT_SENT_LAYER2_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2482 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NOT_SENT_OCTET_TOTAL_COUNT 168 |
The total number of octets in packets in Flow Records that were generated by the Metering Process and dropped by the Metering Process or by the Exporting Process instead of being sent to the Collecting Process. There are several potential reasons for this including resource shortage and special Flow export policies.
Definition at line 761 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NOT_SENT_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 762 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NOT_SENT_PACKET_TOTAL_COUNT 167 |
The total number of packets in Flow Records that were generated by the Metering Process and dropped by the Metering Process or by the Exporting Process instead of being sent to the Collecting Process. There are several potential reasons for this including resource shortage and special Flow export policies.
Definition at line 753 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_NOT_SENT_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 754 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_DOMAIN_ID 149 |
An identifier of an Observation Domain that is locally unique to an Exporting Process. The Exporting Process uses the Observation Domain ID to uniquely identify to the Collecting Process the Observation Domain where Flows were metered. It is RECOMMENDED that this identifier is also unique per IPFIX Device.
Definition at line 648 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_DOMAIN_ID_DEFAULT_LENGTH 4 |
Definition at line 649 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_DOMAIN_NAME 300 |
The name of an observation domain identified by an observationDomainId.
Definition at line 1652 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_DOMAIN_NAME_DEFAULT_LENGTH 64 |
Definition at line 1653 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_POINT_ID 138 |
An identifier of an Observation Point that is unique per Observation Domain. It is RECOMMENDED that this identifier is also unique per IPFIX Device. Typically, this Information Element is used for limiting the scope of other Information Elements.
Definition at line 577 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_POINT_ID_DEFAULT_LENGTH 8 |
Definition at line 578 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_POINT_TYPE 277 |
Type of observation point. Values are listed in the observationPointType registry. See [http://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-observation-point-type].
Definition at line 1505 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_POINT_TYPE_DEFAULT_LENGTH 1 |
Definition at line 1506 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_TIME_MICROSECONDS 324 |
This Information Element specifies the absolute time in microseconds of an observation.
Definition at line 1801 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_TIME_MICROSECONDS_DEFAULT_LENGTH 8 |
Definition at line 1802 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_TIME_MILLISECONDS 323 |
This Information Element specifies the absolute time in milliseconds of an observation.
Definition at line 1796 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_TIME_MILLISECONDS_DEFAULT_LENGTH 8 |
Definition at line 1797 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_TIME_NANOSECONDS 325 |
This Information Element specifies the absolute time in nanoseconds of an observation.
Definition at line 1806 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_TIME_NANOSECONDS_DEFAULT_LENGTH 8 |
Definition at line 1807 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_TIME_SECONDS 322 |
This Information Element specifies the absolute time in seconds of an observation.
Definition at line 1791 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVATION_TIME_SECONDS_DEFAULT_LENGTH 4 |
Definition at line 1792 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVED_FLOW_TOTAL_COUNT 163 |
The total number of Flows observed in the Observation Domain since the Metering Process (re-)initialization for this Observation Point.
Definition at line 725 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OBSERVED_FLOW_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 726 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OCTET_DELTA_SUM_OF_SQUARES 198 |
The sum of the squared numbers of octets per incoming packet since the previous report (if any) for this Flow at the Observation Point. The number of octets includes IP header(s) and IP payload.
Definition at line 942 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OCTET_DELTA_SUM_OF_SQUARES_DEFAULT_LENGTH 8 |
Definition at line 943 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OCTET_TOTAL_SUM_OF_SQUARES 199 |
The total sum of the squared numbers of octets in incoming packets for this Flow at the Observation Point since the Metering Process (re-)initialization for this Observation Point. The number of octets includes IP header(s) and IP payload.
Definition at line 949 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OCTET_TOTAL_SUM_OF_SQUARES_DEFAULT_LENGTH 8 |
Definition at line 950 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OPAQUE_OCTETS 266 |
This Information Element is used to encapsulate non- IPFIX data into an IPFIX Message stream, for the purpose of allowing a non-IPFIX data processor to store a data stream inline within an IPFIX File. A Collecting Process or File Writer MUST NOT try to interpret this binary data. This Information Element differs from paddingOctets as its contents are meaningful in some non-IPFIX context, while the contents of paddingOctets MUST be 0x00 and are intended only for Information Element alignment.
Definition at line 1403 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OPAQUE_OCTETS_DEFAULT_LENGTH 3 |
Definition at line 1404 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_EXPORTER_IPV4_ADDRESS 403 |
The IPv4 address used by the Exporting Process on an Original Exporter, as seen by the Collecting Process on an IPFIX Mediator. Used to provide information about the Original Observation Points to a downstream Collector.
Definition at line 2323 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_EXPORTER_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 2324 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_EXPORTER_IPV6_ADDRESS 404 |
The IPv6 address used by the Exporting Process on an Original Exporter, as seen by the Collecting Process on an IPFIX Mediator. Used to provide information about the Original Observation Points to a downstream Collector.
Definition at line 2330 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_EXPORTER_IPV6_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 2331 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_FLOWS_COMPLETED 377 |
The conservative count of Original Flows whose last packet is represented within this Aggregated Flow. Conservative counts must sum to the original count on re-aggregation.
Definition at line 2138 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_FLOWS_COMPLETED_DEFAULT_LENGTH 8 |
Definition at line 2139 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_FLOWS_INITIATED 376 |
The conservative count of Original Flows whose first packet is represented within this Aggregated Flow. Conservative counts must sum to the original count on re-aggregation.
Definition at line 2132 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_FLOWS_INITIATED_DEFAULT_LENGTH 8 |
Definition at line 2133 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_FLOWS_PRESENT 375 |
The non-conservative count of Original Flows contributing to this Aggregated Flow. Non-conservative counts need not sum to the original count on re-aggregation.
Definition at line 2126 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_FLOWS_PRESENT_DEFAULT_LENGTH 8 |
Definition at line 2127 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_OBSERVATION_DOMAIN_ID 405 |
The Observation Domain ID reported by the Exporting Process on an Original Exporter, as seen by the Collecting Process on an IPFIX Mediator. Used to provide information about the Original Observation Domain to a downstream Collector. When cascading through multiple Mediators, this identifies the initial Observation Domain in the cascade.
Definition at line 2338 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_ORIGINAL_OBSERVATION_DOMAIN_ID_DEFAULT_LENGTH 4 |
Definition at line 2339 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUT_BYTES 23 |
Outgoing counter with length N x 8 bits for the number of bytes associated with an IP Flow
Definition at line 133 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUT_BYTES_DEFAULT_LENGTH 4 |
Definition at line 134 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUT_DST_MAC 57 |
Outgoing destination MAC address
Definition at line 298 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUT_DST_MAC_DEFAULT_LENGTH 6 |
Definition at line 299 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUT_PKTS 24 |
Outgoing counter with length N x 8 bits for the number of packets associated with an IP Flow.
Definition at line 138 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUT_PKTS_DEFAULT_LENGTH 4 |
Definition at line 139 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUT_SRC_MAC 81 |
Outgoing source MAC address
Definition at line 404 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUT_SRC_MAC_DEFAULT_LENGTH 6 |
Definition at line 405 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUTPUT_SNMP 14 |
Output interface index; default for N is 2 but higher values could be used
Definition at line 87 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_OUTPUT_SNMP_DEFAULT_LENGTH 2 |
Definition at line 88 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_P2P_TECHNOLOGY 288 |
Specifies if the Application ID is based on peer-to-peer technology.
Definition at line 1584 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_P2P_TECHNOLOGY_DEFAULT_LENGTH 64 |
Definition at line 1585 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PADDING_OCTETS 210 |
The value of this Information Element is always a sequence of 0x00 values.
Definition at line 1013 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PADDING_OCTETS_DEFAULT_LENGTH 3 |
Definition at line 1014 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PAYLOAD_LENGTH_IPV6 191 |
This Information Element reports the value of the Payload Length field in the IPv6 header. Note that IPv6 extension headers belong to the payload. Also note that in case of a jumbo payload option the value of the Payload Length field in the IPv6 header is zero and so will be the value reported by this Information Element.
Definition at line 897 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PAYLOAD_LENGTH_IPV6_DEFAULT_LENGTH 2 |
Definition at line 898 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_ID 142 |
An identifier of a line port that is unique per IPFIX Device hosting an Observation Point. Typically, this Information Element is used for limiting the scope of other Information Elements.
Definition at line 600 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_ID_DEFAULT_LENGTH 4 |
Definition at line 601 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_RANGE_END 362 |
The port number identifying the end of a range of ports. A value of zero indicates that the range end is not specified, ie the range is defined in some other way.
Definition at line 2055 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_RANGE_END_DEFAULT_LENGTH 2 |
Definition at line 2056 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_RANGE_NUM_PORTS 364 |
The number of ports in a port range. A value of zero indicates that the number of ports is not specified, ie the range is defined in some other way.
Definition at line 2068 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_RANGE_NUM_PORTS_DEFAULT_LENGTH 2 |
Definition at line 2069 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_RANGE_START 361 |
The port number identifying the start of a range of ports. A value of zero indicates that the range start is not specified, ie the range is defined in some other way.
Definition at line 2049 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_RANGE_START_DEFAULT_LENGTH 2 |
Definition at line 2050 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_RANGE_STEP_SIZE 363 |
The step size in a port range. The default step size is 1, which indicates contiguous ports. A value of zero indicates that the step size is not specified, ie the range is defined in some other way.
Definition at line 2062 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PORT_RANGE_STEP_SIZE_DEFAULT_LENGTH 2 |
Definition at line 2063 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_DOT1Q_CUSTOMER_VLAN_ID 255 |
The definition of this Information Element is identical to the definition of Information Element 'dot1qCustomerVlanId', except that it reports a potentially modified value caused by a middlebox function after the packet passed the Observation Point.
Definition at line 1313 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_DOT1Q_CUSTOMER_VLAN_ID_DEFAULT_LENGTH 2 |
Definition at line 1314 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_DOT1Q_VLAN_ID 254 |
The definition of this Information Element is identical to the definition of Information Element 'dot1qVlanId', except that it reports a potentially modified value caused by a middlebox function after the packet passed the Observation Point.
Definition at line 1306 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_DOT1Q_VLAN_ID_DEFAULT_LENGTH 2 |
Definition at line 1307 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_IP_PRECEDENCE 257 |
The definition of this Information Element is identical to the definition of Information Element 'ipPrecedence', except that it reports a potentially modified value caused by a middlebox function after the packet passed the Observation Point.
Definition at line 1326 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_IP_PRECEDENCE_DEFAULT_LENGTH 1 |
Definition at line 1327 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_LAYER2_OCTET_DELTA_COUNT 417 |
The definition of this Information Element is identical to the definition of the layer2OctetDeltaCount Information Element, except that it reports a potentially modified value caused by a middlebox function after the packet passed the Observation Point.
Definition at line 2422 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_LAYER2_OCTET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2423 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_LAYER2_OCTET_TOTAL_COUNT 420 |
The definition of this Information Element is identical to the definition of the layer2OctetTotalCount Information Element, except that it reports a potentially modified value caused by a middlebox function after the packet passed the Observation Point.
Definition at line 2437 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_LAYER2_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2438 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MCAST_LAYER2_OCTET_DELTA_COUNT 418 |
The number of layer 2 octets since the previous report (if any) in outgoing multicast packets sent for packets of this Flow by a multicast daemon within the Observation Domain. This property cannot necessarily be observed at the Observation Point but may be retrieved by other means. The number of octets includes layer 2 header(s) and layer 2 payload.
Definition at line 2430 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MCAST_LAYER2_OCTET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2431 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MCAST_LAYER2_OCTET_TOTAL_COUNT 421 |
The total number of layer 2 octets in outgoing multicast packets sent for packets of this Flow by a multicast daemon in the Observation Domain since the Metering Process (re-)initialization. This property cannot necessarily be observed at the Observation Point but may be retrieved by other means. The number of octets includes layer 2 header(s) and layer 2 payload.
Definition at line 2445 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MCAST_LAYER2_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2446 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MCAST_OCTET_TOTAL_COUNT 175 |
The total number of octets in outgoing multicast packets sent for packets of this Flow by a multicast daemon in the Observation Domain since the Metering Process (re-)initialization. This property cannot necessarily be observed at the Observation Point, but may be retrieved by other means. The number of octets includes IP header(s) and IP payload.
Definition at line 810 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MCAST_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 811 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MCAST_PACKET_TOTAL_COUNT 174 |
The total number of outgoing multicast packets sent for packets of this Flow by a multicast daemon within the Observation Domain since the Metering Process (re-)initialization. This property cannot necessarily be observed at the Observation Point, but may be retrieved by other means.
Definition at line 802 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MCAST_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 803 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MPLS_TOP_LABEL_EXP 237 |
The definition of this Information Element is identical to the definition of Information Element 'mplsTopLabelExp', except that it reports a potentially modified value caused by a middlebox function after the packet passed the Observation Point.
Definition at line 1186 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_MPLS_TOP_LABEL_EXP_DEFAULT_LENGTH 1 |
Definition at line 1187 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NAPT_DESTINATION_TRANSPORT_PORT 228 |
The definition of this Information Element is identical to the definition of Information Element 'destinationTransportPort', except that it reports a modified value caused by a Network Address Port Translation (NAPT) middlebox function after the packet passed the Observation Point.
Definition at line 1125 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NAPT_DESTINATION_TRANSPORT_PORT_DEFAULT_LENGTH 2 |
Definition at line 1126 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NAPT_SOURCE_TRANSPORT_PORT 227 |
The definition of this Information Element is identical to the definition of Information Element 'sourceTransportPort', except that it reports a modified value caused by a Network Address Port Translation (NAPT) middlebox function after the packet passed the Observation Point.
Definition at line 1118 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NAPT_SOURCE_TRANSPORT_PORT_DEFAULT_LENGTH 2 |
Definition at line 1119 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NAT_DESTINATION_IPV4_ADDRESS 226 |
The definition of this Information Element is identical to the definition of Information Element 'destinationIPv4Address', except that it reports a modified value caused by a NAT middlebox function after the packet passed the Observation Point.
Definition at line 1111 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NAT_DESTINATION_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 1112 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NAT_SOURCE_IPV4_ADDRESS 225 |
The definition of this Information Element is identical to the definition of Information Element 'sourceIPv4Address', except that it reports a modified value caused by a NAT middlebox function after the packet passed the Observation Point.
Definition at line 1104 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NAT_SOURCE_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 1105 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NATDESTINATION_IPV6_ADDRESS 282 |
The definition of this Information Element is identical to the definition of Information Element 'destinationIPv6Address', except that it reports a modified value caused by a NAT64 middlebox function after the packet passed the Observation Point. See [RFC8200] for the definition of the Destination Address field in the IPv6 header. See [RFC3234] for the definition of middleboxes. See [RFC6146] for nat64 specification.
Definition at line 1545 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NATDESTINATION_IPV6_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 1546 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NATSOURCE_IPV6_ADDRESS 281 |
The definition of this Information Element is identical to the definition of Information Element 'sourceIPv6Address', except that it reports a modified value caused by a NAT64 middlebox function after the packet passed the Observation Point. See [RFC8200] for the definition of the Source Address field in the IPv6 header. See [RFC3234] for the definition of middleboxes. See [RFC6146] for nat64 specification.
Definition at line 1536 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_NATSOURCE_IPV6_ADDRESS_DEFAULT_LENGTH 8 |
Definition at line 1537 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_OCTET_TOTAL_COUNT 171 |
The definition of this Information Element is identical to the definition of Information Element 'octetTotalCount', except that it reports a potentially modified value caused by a middlebox function after the packet passed the Observation Point.
Definition at line 778 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_OCTET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 779 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_PACKET_TOTAL_COUNT 172 |
The definition of this Information Element is identical to the definition of Information Element 'packetTotalCount', except that it reports a potentially modified value caused by a middlebox function after the packet passed the Observation Point.
Definition at line 785 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POST_PACKET_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 786 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POSTIP_DIFF_SERV_CODE_POINT 98 |
The value of a Differentiated Services Code Point (DSCP) encoded in the Differentiated Services Field, after modification.
Definition at line 481 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_POSTIP_DIFF_SERV_CODE_POINT_DEFAULT_LENGTH 1 |
Definition at line 482 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PRIVATE_ENTERPRISE_NUMBER 346 |
A private enterprise number, as assigned by IANA. Within the context of an Information Element Type record, this element can be used along with the informationElementId element to scope properties to a specific Information Element. To export type information about an IANA-assigned Information Element, set the privateEnterpriseNumber to 0, or do not export the privateEnterpriseNumber in the type record. To export type information about an enterprise-specific Information Element, export the enterprise number in privateEnterpriseNumber, and export the Information Element number with the Enterprise bit cleared in informationElementId. The Enterprise bit in the associated informationElementId Information Element MUST be ignored by the Collecting Process.
Definition at line 1956 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PRIVATE_ENTERPRISE_NUMBER_DEFAULT_LENGTH 4 |
Definition at line 1957 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PROTOCOL 4 |
IP protocol byte
Definition at line 35 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PROTOCOL_DEFAULT_LENGTH 1 |
Definition at line 36 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PSEUDO_WIRE_CONTROL_WORD 251 |
The 32-bit Preferred Pseudo Wire (PW) MPLS Control Word as defined in Section 3 of [RFC4385].
Definition at line 1287 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PSEUDO_WIRE_CONTROL_WORD_DEFAULT_LENGTH 4 |
Definition at line 1288 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PSEUDO_WIRE_DESTINATION_IPV4_ADDRESS 432 |
The destination IPv4 address of the PSN tunnel carrying the pseudowire.
Definition at line 2512 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PSEUDO_WIRE_DESTINATION_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 2513 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PSEUDO_WIRE_ID 249 |
A 32-bit non-zero connection identifier, which together with the pseudoWireType, identifies the Pseudo Wire (PW) as defined in [RFC8077].
Definition at line 1276 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PSEUDO_WIRE_ID_DEFAULT_LENGTH 4 |
Definition at line 1277 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PSEUDO_WIRE_TYPE 250 |
The value of this information element identifies the type of MPLS Pseudo Wire (PW) as defined in [RFC4446].
Definition at line 1282 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_PSEUDO_WIRE_TYPE_DEFAULT_LENGTH 2 |
Definition at line 1283 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RELATIVE_ERROR 321 |
This Information Element specifies the maximum possible positive or negative error ratio for the reported value for a given Information Element as percentage of the measured value. The real value of the metric can differ by relativeError percent (positive or negative) from the measured value.
Definition at line 1786 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RELATIVE_ERROR_DEFAULT_LENGTH 8 |
Definition at line 1787 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_REPLICATION_FACTOR 99 |
Multicast replication factor.
Definition at line 486 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_REPLICATION_FACTOR_DEFAULT_LENGTH 4 |
Definition at line 487 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RESPONDER_OCTETS 232 |
The total number of layer 4 payload bytes in a flow from the responder since the previous report. The responder is the device which replies to the initiator, and remains the same for the life of the session.
Definition at line 1156 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RESPONDER_OCTETS_DEFAULT_LENGTH 8 |
Definition at line 1157 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RESPONDER_PACKETS 299 |
The total number of layer 4 packets in a flow from the responder since the previous report. The responder is the device which replies to the initiator, and remains the same for the life of the session.
Definition at line 1647 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RESPONDER_PACKETS_DEFAULT_LENGTH 8 |
Definition at line 1648 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RFC3550_JITTER_MICROSECONDS 386 |
Interarrival jitter as defined in section 6.4.1 of [RFC3550], measured in microseconds.
Definition at line 2198 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RFC3550_JITTER_MICROSECONDS_DEFAULT_LENGTH 4 |
Definition at line 2199 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RFC3550_JITTER_MILLISECONDS 385 |
Interarrival jitter as defined in section 6.4.1 of [RFC3550], measured in milliseconds.
Definition at line 2193 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RFC3550_JITTER_MILLISECONDS_DEFAULT_LENGTH 4 |
Definition at line 2194 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RFC3550_JITTER_NANOSECONDS 387 |
Interarrival jitter as defined in section 6.4.1 of [RFC3550], measured in nanoseconds.
Definition at line 2203 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RFC3550_JITTER_NANOSECONDS_DEFAULT_LENGTH 4 |
Definition at line 2204 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RTP_SEQUENCE_NUMBER 370 |
The RTP sequence number per [RFC3550].
Definition at line 2100 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_RTP_SEQUENCE_NUMBER_DEFAULT_LENGTH 2 |
Definition at line 2101 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLER_NAME 84 |
Name of the flow sampler
Definition at line 419 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLER_NAME_DEFAULT_LENGTH 64 |
Definition at line 420 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_ALGORITHM 35 |
The type of algorithm used for sampled NetFlow: 0x01 Deterministic Sampling ,0x02 Random Sampling
Definition at line 194 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_ALGORITHM_DEFAULT_LENGTH 1 |
Definition at line 195 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_FLOW_INTERVAL 396 |
This Information Element specifies the number of Flows that are consecutively sampled. A value of 100 means that 100 consecutive Flows are sampled. For example, this Information Element may be used to describe the configuration of a systematic count-based Sampling Selector.
Definition at line 2273 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_FLOW_INTERVAL_DEFAULT_LENGTH 8 |
Definition at line 2274 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_FLOW_SPACING 397 |
This Information Element specifies the number of Flows between two "samplingFlowInterval"s. A value of 100 means that the next interval starts 100 Flows (which are not sampled) after the current "samplingFlowInterval" is over. For example, this Information Element may be used to describe the configuration of a systematic count-based Sampling Selector.
Definition at line 2281 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_FLOW_SPACING_DEFAULT_LENGTH 8 |
Definition at line 2282 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_INTERVAL 34 |
When using sampled NetFlow, the rate at which packets are sampled i.e.: a value of 100 indicates that one of every 100 packets is sampled
Definition at line 189 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_INTERVAL_DEFAULT_LENGTH 4 |
Definition at line 190 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_PACKET_INTERVAL 305 |
This Information Element specifies the number of packets that are consecutively sampled. A value of 100 means that 100 consecutive packets are sampled.
Definition at line 1683 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_PACKET_INTERVAL_DEFAULT_LENGTH 4 |
Definition at line 1684 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_PACKET_SPACE 306 |
This Information Element specifies the number of packets between two "samplingPacketInterval"s. A value of 100 means that the next interval starts 100 packets (which are not sampled) after the current "samplingPacketInterval" is over.
Definition at line 1690 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_PACKET_SPACE_DEFAULT_LENGTH 4 |
Definition at line 1691 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_POPULATION 310 |
This Information Element specifies the number of elements in the parent Population for random Sampling methods.
Definition at line 1715 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_POPULATION_DEFAULT_LENGTH 4 |
Definition at line 1716 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_PROBABILITY 311 |
This Information Element specifies the probability that a packet is sampled, expressed as a value between 0 and 1. The probability is equal for every packet. A value of 0 means no packet was sampled since the probability is 0.
Definition at line 1722 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_PROBABILITY_DEFAULT_LENGTH 8 |
Definition at line 1723 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_SIZE 309 |
This Information Element specifies the number of elements taken from the parent Population for random Sampling methods.
Definition at line 1709 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_SIZE_DEFAULT_LENGTH 4 |
Definition at line 1710 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_TIME_INTERVAL 307 |
This Information Element specifies the time interval in microseconds during which all arriving packets are sampled.
Definition at line 1696 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_TIME_INTERVAL_DEFAULT_LENGTH 4 |
Definition at line 1697 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_TIME_SPACE 308 |
This Information Element specifies the time interval in microseconds between two "samplingTimeInterval"s. A value of 100 means that the next interval starts 100 microseconds (during which no packets are sampled) after the current "samplingTimeInterval" is over.
Definition at line 1703 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SAMPLING_TIME_SPACE_DEFAULT_LENGTH 4 |
Definition at line 1704 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SECTION_EXPORTED_OCTETS 410 |
This Information Element specifies the observed length of the packet section (e.g., dataLinkFrameSection, ipHeaderPacketSection, ipPayloadPacketSection, mplsLabelStackSection, and mplsPayloadPacketSection) when padding is used.
Definition at line 2376 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SECTION_EXPORTED_OCTETS_DEFAULT_LENGTH 2 |
Definition at line 2377 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SECTION_OFFSET 409 |
This Information Element specifies the offset of the packet section (e.g., dataLinkFrameSection, ipHeaderPacketSection, ipPayloadPacketSection, mplsLabelStackSection, and mplsPayloadPacketSection). If this Information Element is omitted, it defaults to zero (i.e., no offset).
Definition at line 2369 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SECTION_OFFSET_DEFAULT_LENGTH 2 |
Definition at line 2370 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTION_SEQUENCE_ID 301 |
From all the packets observed at an Observation Point, a subset of the packets is selected by a sequence of one or more Selectors. The selectionSequenceId is a unique value per Observation Domain, specifying the Observation Point and the sequence of Selectors through which the packets are selected.
Definition at line 1660 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTION_SEQUENCE_ID_DEFAULT_LENGTH 8 |
Definition at line 1661 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ALGORITHM 304 |
This Information Element identifies the packet selection methods (e.g., Filtering, Sampling) that are applied by the Selection Process.
Definition at line 1677 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ALGORITHM_DEFAULT_LENGTH 2 |
Definition at line 1678 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID 302 |
The Selector ID is the unique ID identifying a Primitive Selector. Each Primitive Selector must have a unique ID in the Observation Domain.
Definition at line 1666 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_DEFAULT_LENGTH 8 |
Definition at line 1667 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_TOTAL_FLOWS_OBSERVED 394 |
This Information Element specifies the total number of Flows observed by a Selector, for a specific value of SelectorId. This Information Element should be used in an Options Template scoped to the observation to which it refers. See Section 3.4.2.1 of the IPFIX protocol document [RFC7011].
Definition at line 2258 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_TOTAL_FLOWS_OBSERVED_DEFAULT_LENGTH 8 |
Definition at line 2259 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_TOTAL_FLOWS_SELECTED 395 |
This Information Element specifies the total number of Flows selected by a Selector, for a specific value of SelectorId. This Information Element should be used in an Options Template scoped to the observation to which it refers. See Section 3.4.2.1 of the IPFIX protocol document [RFC7011].
Definition at line 2266 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_TOTAL_FLOWS_SELECTED_DEFAULT_LENGTH 8 |
Definition at line 2267 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_TOTAL_PKTS_OBSERVED 318 |
This Information Element specifies the total number of packets observed by a Selector, for a specific value of SelectorId.
Definition at line 1764 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_TOTAL_PKTS_OBSERVED_DEFAULT_LENGTH 8 |
Definition at line 1765 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_TOTAL_PKTS_SELECTED 319 |
This Information Element specifies the total number of packets selected by a Selector, for a specific value of SelectorId.
Definition at line 1770 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_ID_TOTAL_PKTS_SELECTED_DEFAULT_LENGTH 8 |
Definition at line 1771 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_NAME 335 |
The name of a selector identified by a selectorID. Globally unique per Metering Process.
Definition at line 1863 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SELECTOR_NAME_DEFAULT_LENGTH 64 |
Definition at line 1864 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SESSION_SCOPE 267 |
The presence of this Information Element as scope in an Options Template signifies that the options described by the Template apply to the IPFIX Transport Session that contains them. Note that as all options are implicitly scoped to Transport Session and Observation Domain, this Information Element is equivalent to a "null" scope. It is defined for general purpose session scoping of options, and proposed specifically to allow the attachment of time window to an IPFIX File via IPFIX Options. The value of this Information Element MUST be written as 0 by the File Writer or Exporting Process. The value of this Information Element MUST be ignored by the File Reader or the Collecting Process.
Definition at line 1415 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SESSION_SCOPE_DEFAULT_LENGTH 1 |
Definition at line 1416 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SOURCE_IPV6_PREFIX 170 |
IPv6 source address prefix.
Definition at line 771 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SOURCE_IPV6_PREFIX_DEFAULT_LENGTH 8 |
Definition at line 772 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SOURCE_TRANSPORT_PORTS_LIMIT 458 |
This Information Element contains the maximum number of IP source transport ports that can be used by an end user when sending IP packets; each user is associated with one or more (source) IPv4 or IPv6 addresses. This Information Element is particularly useful in address-sharing deployments that adhere to REQ-4 of [RFC6888]. Limiting the number of ports assigned to each user ensures fairness among users and mitigates the denial-of-service attack that a user could launch against other users through the address-sharing device in order to grab more ports.
Definition at line 2718 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SOURCE_TRANSPORT_PORTS_LIMIT_DEFAULT_LENGTH 2 |
Definition at line 2719 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_AS 16 |
Source BGP autonomous system number where N could be 2 or 4
Definition at line 97 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_AS_DEFAULT_LENGTH 2 |
Definition at line 98 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_MASK 9 |
The number of contiguous bits in the source address subnet mask i.e.: the submask in slash notation
Definition at line 61 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_MASK_DEFAULT_LENGTH 1 |
Definition at line 62 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_TOS 5 |
Type of Service byte setting when entering incoming interface
Definition at line 40 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_TOS_DEFAULT_LENGTH 1 |
Definition at line 41 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_TRAFFIC_INDEX 92 |
BGP Policy Accounting Source Traffic Index
Definition at line 455 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_TRAFFIC_INDEX_DEFAULT_LENGTH 4 |
Definition at line 456 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_VLAN 58 |
Virtual LAN identifier associated with ingress interface
Definition at line 303 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SRC_VLAN_DEFAULT_LENGTH 2 |
Definition at line 304 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_STA_IPV4_ADDRESS 366 |
The IPv4 address of a wireless station (STA).
Definition at line 2078 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_STA_IPV4_ADDRESS_DEFAULT_LENGTH 4 |
Definition at line 2079 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_STA_MAC_ADDRESS 365 |
The IEEE 802 MAC address of a wireless station (STA).
Definition at line 2073 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_STA_MAC_ADDRESS_DEFAULT_LENGTH 6 |
Definition at line 2074 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SUB_TEMPLATE_LIST 292 |
Specifies a generic Information Element with a subTemplateList abstract data type.
Definition at line 1605 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SUB_TEMPLATE_LIST_DEFAULT_LENGTH 64 |
Definition at line 1606 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SUB_TEMPLATE_MULTI_LIST 293 |
Specifies a generic Information Element with a subTemplateMultiList abstract data type.
Definition at line 1610 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SUB_TEMPLATE_MULTI_LIST_DEFAULT_LENGTH 64 |
Definition at line 1611 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SYSTEM_INIT_TIME_MILLISECONDS 160 |
The absolute timestamp of the last (re-)initialization of the IPFIX Device.
Definition at line 707 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_SYSTEM_INIT_TIME_MILLISECONDS_DEFAULT_LENGTH 8 |
Definition at line 708 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_ACK_TOTAL_COUNT 222 |
The total number of packets of this Flow with TCP "Acknowledgment field significant" (ACK) flag set.
Definition at line 1086 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_ACK_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 1087 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_ACKNOWLEDGMENT_NUMBER 185 |
The acknowledgment number in the TCP header.
Definition at line 860 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_ACKNOWLEDGMENT_NUMBER_DEFAULT_LENGTH 4 |
Definition at line 861 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_DESTINATION_PORT 183 |
The destination port identifier in the TCP header.
Definition at line 850 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_DESTINATION_PORT_DEFAULT_LENGTH 2 |
Definition at line 851 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_FIN_TOTAL_COUNT 219 |
The total number of packets of this Flow with TCP "No more data from sender" (FIN) flag set.
Definition at line 1070 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_FIN_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 1071 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_FLAGS 6 |
Cumulative of all the TCP flags seen for this flow
Definition at line 45 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_FLAGS_DEFAULT_LENGTH 1 |
Definition at line 46 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_HEADER_LENGTH 188 |
The length of the TCP header. Note that the value of this Information Element is different from the value of the Data Offset field in the TCP header. The Data Offset field indicates the length of the TCP header in units of 4 octets. This Information Elements specifies the length of the TCP header in units of octets.
Definition at line 879 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_HEADER_LENGTH_DEFAULT_LENGTH 1 |
Definition at line 880 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_OPTIONS 209 |
TCP options in packets of this Flow. The information is encoded in a set of bit fields. For each TCP option, there is a bit in this set. The bit is set to 1 if any observed packet of this Flow contains the corresponding TCP option. Otherwise, if no observed packet of this Flow contained the respective TCP option, the value of the corresponding bit is 0.
Definition at line 1008 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_OPTIONS_DEFAULT_LENGTH 8 |
Definition at line 1009 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_PSH_TOTAL_COUNT 221 |
The total number of packets of this Flow with TCP "Push Function" (PSH) flag set.
Definition at line 1080 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_PSH_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 1081 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_RST_TOTAL_COUNT 220 |
The total number of packets of this Flow with TCP "Reset the connection" (RST) flag set.
Definition at line 1075 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_RST_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 1076 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_SEQUENCE_NUMBER 184 |
The sequence number in the TCP header.
Definition at line 855 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_SEQUENCE_NUMBER_DEFAULT_LENGTH 4 |
Definition at line 856 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_SOURCE_PORT 182 |
The source port identifier in the TCP header.
Definition at line 845 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_SOURCE_PORT_DEFAULT_LENGTH 2 |
Definition at line 846 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_SYN_TOTAL_COUNT 218 |
The total number of packets of this Flow with TCP "Synchronize sequence numbers" (SYN) flag set.
Definition at line 1065 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_SYN_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 1066 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_URG_TOTAL_COUNT 223 |
The total number of packets of this Flow with TCP "Urgent Pointer field significant" (URG) flag set.
Definition at line 1092 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_URG_TOTAL_COUNT_DEFAULT_LENGTH 8 |
Definition at line 1093 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_URGENT_POINTER 187 |
The urgent pointer in the TCP header.
Definition at line 871 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_URGENT_POINTER_DEFAULT_LENGTH 2 |
Definition at line 872 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_WINDOW_SCALE 238 |
The scale of the window field in the TCP header.
Definition at line 1191 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_WINDOW_SCALE_DEFAULT_LENGTH 2 |
Definition at line 1192 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_WINDOW_SIZE 186 |
The window field in the TCP header. If the TCP window scale is supported, then TCP window scale must be known to fully interpret the value of this information.
Definition at line 866 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TCP_WINDOW_SIZE_DEFAULT_LENGTH 2 |
Definition at line 867 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TEMPLATE_ID 145 |
An identifier of a Template that is locally unique within a combination of a Transport session and an Observation Domain.
Definition at line 622 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TEMPLATE_ID_DEFAULT_LENGTH 2 |
Definition at line 623 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TOTAL_BYTES_EXP 40 |
Counter with length N x 8 bits for bytes for the number of bytes exported by the Observation Domain
Definition at line 220 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TOTAL_BYTES_EXP_DEFAULT_LENGTH 4 |
Definition at line 221 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TOTAL_FLOWS_EXP 42 |
Counter with length N x 8 bits for bytes for the number of flows exported by the Observation Domain
Definition at line 232 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TOTAL_FLOWS_EXP_DEFAULT_LENGTH 4 |
Definition at line 233 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TOTAL_LENGTH_IPV4 190 |
The total length of the IPv4 packet.
Definition at line 889 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TOTAL_LENGTH_IPV4_DEFAULT_LENGTH 2 |
Definition at line 890 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TOTAL_PKTS_EXP 41 |
Counter with length N x 8 bits for bytes for the number of packets exported by the Observation Domain
Definition at line 226 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TOTAL_PKTS_EXP_DEFAULT_LENGTH 4 |
Definition at line 227 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TRANSPORT_OCTET_DELTA_COUNT 401 |
The number of octets, excluding IP header(s) and Layer 4 transport protocol header(s), observed for this Flow at the Observation Point since the previous report (if any).
Definition at line 2309 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TRANSPORT_OCTET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2310 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TRANSPORT_PACKET_DELTA_COUNT 402 |
The number of packets containing at least one octet beyond the IP header(s) and Layer 4 transport protocol header(s), observed for this Flow at the Observation Point since the previous report (if any).
Definition at line 2316 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TRANSPORT_PACKET_DELTA_COUNT_DEFAULT_LENGTH 8 |
Definition at line 2317 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TUNNEL_TECHNOLOGY 289 |
Specifies if the Application ID is used as a tunnel technology.
Definition at line 1589 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_TUNNEL_TECHNOLOGY_DEFAULT_LENGTH 64 |
Definition at line 1590 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_UDP_DESTINATION_PORT 181 |
The destination port identifier in the UDP header.
Definition at line 840 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_UDP_DESTINATION_PORT_DEFAULT_LENGTH 2 |
Definition at line 841 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_UDP_MESSAGE_LENGTH 205 |
The value of the Length field in the UDP header.
Definition at line 979 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_UDP_MESSAGE_LENGTH_DEFAULT_LENGTH 2 |
Definition at line 980 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_UDP_SOURCE_PORT 180 |
The source port identifier in the UDP header.
Definition at line 835 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_UDP_SOURCE_PORT_DEFAULT_LENGTH 2 |
Definition at line 836 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_UPPER_CILIMIT 336 |
This Information Element specifies the upper limit of a confidence interval. It is used to provide an accuracy statement for an estimated value. The confidence limits define the range in which the real value is assumed to be with a certain probability p. Confidence limits always need to be associated with a confidence level that defines this probability p. Please note that a confidence interval only provides a probability that the real value lies within the limits. That means the real value can lie outside the confidence limits.
Definition at line 1873 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_UPPER_CILIMIT_DEFAULT_LENGTH 8 |
Definition at line 1874 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_USER_NAME 371 |
User name associated with the flow.
Definition at line 2105 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_USER_NAME_DEFAULT_LENGTH 64 |
Definition at line 2106 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VALUE_DISTRIBUTION_METHOD 384 |
A description of the method used to distribute the counters from Contributing Flows into the Aggregated Flow records described by an associated scope, generally a Template. The method is deemed to apply to all the non-key Information Elements in the referenced scope for which value distribution is a valid operation; if the originalFlowsInitiated and/or originalFlowsCompleted Information Elements appear in the Template, they are not subject to this distribution method, as they each infer their own distribution method. The valueDistributionMethod registry is intended to list a complete set of possible value distribution methods. See [https://www.iana.org/assignments/ipfix/ipfix.xhtml#ipfix-value-distribution-method].
Definition at line 2188 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VALUE_DISTRIBUTION_METHOD_DEFAULT_LENGTH 1 |
Definition at line 2189 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VIRTUAL_STATION_INTERFACE_ID 347 |
Instance Identifier of the interface to a Virtual Station. A Virtual Station is an end station instance: it can be a virtual machine or a physical host.
Definition at line 1962 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VIRTUAL_STATION_INTERFACE_ID_DEFAULT_LENGTH 3 |
Definition at line 1963 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VIRTUAL_STATION_INTERFACE_NAME 348 |
Name of the interface to a Virtual Station. A Virtual Station is an end station instance: it can be a virtual machine or a physical host.
Definition at line 1968 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VIRTUAL_STATION_INTERFACE_NAME_DEFAULT_LENGTH 64 |
Definition at line 1969 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VIRTUAL_STATION_NAME 350 |
Name of a Virtual Station. A Virtual Station is an end station instance: it can be a virtual machine or a physical host.
Definition at line 1980 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VIRTUAL_STATION_NAME_DEFAULT_LENGTH 64 |
Definition at line 1981 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VIRTUAL_STATION_UUID 349 |
Unique Identifier of a Virtual Station. A Virtual Station is an end station instance: it can be a virtual machine or a physical host.
Definition at line 1974 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VIRTUAL_STATION_UUID_DEFAULT_LENGTH 3 |
Definition at line 1975 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VPN_IDENTIFIER 482 |
VPN ID in the format specified by [RFC2685]. The size of this Information Element is 7 octets.
Definition at line 2862 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VPN_IDENTIFIER_DEFAULT_LENGTH 3 |
Definition at line 2863 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VRF_NAME 236 |
The name of a VPN Routing and Forwarding table (VRF).
Definition at line 1179 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_VRF_NAME_DEFAULT_LENGTH 64 |
Definition at line 1180 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_WLAN_CHANNEL_ID 146 |
The identifier of the 802.11 (Wi-Fi) channel used.
Definition at line 627 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_WLAN_CHANNEL_ID_DEFAULT_LENGTH 1 |
Definition at line 628 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_WLAN_SSID 147 |
The Service Set IDentifier (SSID) identifying an 802.11 (Wi-Fi) network used. According to IEEE.802-11.1999, the SSID is encoded into a string of up to 32 characters.
Definition at line 633 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_WLAN_SSID_DEFAULT_LENGTH 64 |
Definition at line 634 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_WTP_MAC_ADDRESS 367 |
The IEEE 802 MAC address of a wireless access point (WTP).
Definition at line 2083 of file doca_telemetry_exporter_netflow_types.h.
| #define DOCA_TELEMETRY_EXPORTER_NETFLOW_WTP_MAC_ADDRESS_DEFAULT_LENGTH 6 |
Definition at line 2084 of file doca_telemetry_exporter_netflow_types.h.